Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Bib Ind

70 Tables of Marks

70.9 Other Operations for Tables of Marks

70.9-1 IsInternallyConsistent

70.9-2 DerivedSubgroupTom

70.9-3 DerivedSubgroupsTomPossible

70.9-4 NormalizerTom

70.9-5 ContainedTom

70.9-6 ContainingTom

70.9-7 CyclicExtensionsTom

70.9-8 DecomposedFixedPointVector

70.9-9 EulerianFunctionByTom

70.9-10 IntersectionsTom

70.9-11 FactorGroupTom

70.9-12 MaximalSubgroupsTom

70.9-13 MinimalSupergroupsTom

70.9-1 IsInternallyConsistent

70.9-2 DerivedSubgroupTom

70.9-3 DerivedSubgroupsTomPossible

70.9-4 NormalizerTom

70.9-5 ContainedTom

70.9-6 ContainingTom

70.9-7 CyclicExtensionsTom

70.9-8 DecomposedFixedPointVector

70.9-9 EulerianFunctionByTom

70.9-10 IntersectionsTom

70.9-11 FactorGroupTom

70.9-12 MaximalSubgroupsTom

70.9-13 MinimalSupergroupsTom

The concept of a *table of marks* was introduced by W.?Burnside in his book "Theory of Groups of Finite Order", see?[Bur55]. Therefore a table of marks is sometimes called a *Burnside matrix*.

The table of marks of a finite group G is a matrix whose rows and columns are labelled by the conjugacy classes of subgroups of G and where for two subgroups A and B the (A, B)-entry is the number of fixed points of B in the transitive action of G on the cosets of A in G. So the table of marks characterizes the set of all permutation representations of G.

Moreover, the table of marks gives a compact description of the subgroup lattice of G, since from the numbers of fixed points the numbers of conjugates of a subgroup B contained in a subgroup A can be derived.

A table of marks of a given group G can be constructed from the subgroup lattice of G (see?70.3). For several groups, the table of marks can be restored from the **GAP** library of tables of marks (see?70.13).

Given the table of marks of G, one can display it (see?70.4) and derive information about G and its Burnside ring from it (see?70.7, 70.8, 70.9). Moreover, tables of marks in **GAP** provide an easy access to the classes of subgroups of their underlying groups (see?70.10).

Let G be a finite group with n conjugacy classes of subgroups C_1, C_2, ..., C_n and representatives H_i ∈ C_i, 1 ≤ i ≤ n. The *table of marks* of G is defined to be the n × n matrix M = (m_ij) where the *mark* m_ij is the number of fixed points of the subgroup H_j in the action of G on the right cosets of H_i in G.

Since H_j can only have fixed points if it is contained in a point stabilizer the matrix M is lower triangular if the classes C_i are sorted according to the condition that if H_i is contained in a conjugate of H_j then i ≤ j.

Moreover, the diagonal entries m_ii are nonzero since m_ii equals the index of H_i in its normalizer in G. Hence M is invertible. Since any transitive action of G is equivalent to an action on the cosets of a subgroup of G, one sees that the table of marks completely characterizes the set of all permutation representations of G.

The marks m_ij have further meanings. If H_1 is the trivial subgroup of G then each mark m_i1 in the first column of M is equal to the index of H_i in G since the trivial subgroup fixes all cosets of H_i. If H_n = G then each m_nj in the last row of M is equal to 1 since there is only one coset of G in G. In general, m_ij equals the number of conjugates of H_i containing H_j, multiplied by the index of H_i in its normalizer in G. Moreover, the number c_ij of conjugates of H_j which are contained in H_i can be derived from the marks m_ij via the formula

c_ij = ( m_ij m_j1 ) / ( m_i1 m_jj )

.

Both the marks m_ij and the numbers of subgroups c_ij are needed for the functions described in this chapter.

A brief survey of properties of tables of marks and a description of algorithms for the interactive construction of tables of marks using **GAP** can be found in?[Pfe97].

A table of marks of a group G in **GAP** is represented by an immutable (see?12.6) object `tom` in the category `IsTableOfMarks`

(70.6-2), with defining attributes `SubsTom`

(70.7-1) and `MarksTom`

(70.7-1). These two attributes encode the matrix of marks in a compressed form. The `SubsTom`

(70.7-1) value of `tom` is a list where for each conjugacy class of subgroups the class numbers of its subgroups are stored. These are exactly the positions in the corresponding row of the matrix of marks which have nonzero entries. The marks themselves are stored via the `MarksTom`

(70.7-1) value of `tom`, which is a list that contains for each entry in `SubsTom( `

the corresponding nonzero value of the table of marks.`tom` )

It is possible to create table of marks objects that do not store a group, moreover one can create a table of marks object from a matrix of marks (see?`TableOfMarks`

(70.3-1)). So it may happen that a table of marks object in **GAP** is in fact *not* the table of marks of a group. To some extent, the consistency of a table of marks object can be checked (see?70.9), but **GAP** knows no general way to prove or disprove that a given matrix of nonnegative integers is the matrix of marks for a group. Many functions for tables of marks work well without access to the group –this is one of the arguments why tables of marks are so useful–, but for example normalizers (see?`NormalizerTom`

(70.9-4)) and derived subgroups (see?`DerivedSubgroupTom`

(70.9-2)) of subgroups are in general not uniquely determined by the matrix of marks.

**GAP** tables of marks are assumed to be in lower triangular form, that is, if a subgroup from the conjugacy class corresponding to the i-th row is contained in a subgroup from the class corresponding to the j-th row j then i ≤ j.

The `MarksTom`

(70.7-1) information can be computed from the values of the attributes `NrSubsTom`

(70.7-2), `LengthsTom`

(70.7-3), `OrdersTom`

(70.7-2), and `SubsTom`

(70.7-1). `NrSubsTom`

(70.7-2) stores a list containing for each entry in the `SubsTom`

(70.7-1) value the corresponding number of conjugates that are contained in a subgroup, `LengthsTom`

(70.7-3) a list containing for each conjugacy class of subgroups its length, and `OrdersTom`

(70.7-2) a list containing for each class of subgroups their order. So the `MarksTom`

(70.7-1) value of `tom` may be missing provided that the values of `NrSubsTom`

(70.7-2), `LengthsTom`

(70.7-3), and `OrdersTom`

(70.7-2) are stored in `tom`.

Additional information about a table of marks is needed by some functions. The class numbers of normalizers in G and the number of the derived subgroup of G can be stored via appropriate attributes (see?`NormalizersTom`

(70.9-4), `DerivedSubgroupTom`

(70.9-2)).

If `tom` stores its group G and a bijection from the rows and columns of the matrix of marks of `tom` to the classes of subgroups of G then clearly normalizers, derived subgroup etc.?can be computed from this information. But in general a table of marks need not have access to G, for example `tom` might have been constructed from a generic table of marks (see?70.12), or as table of marks of a factor group from a given table of marks (see?`FactorGroupTom`

(70.9-11)). Access to the group G is provided by the attribute `UnderlyingGroup`

(70.7-7) if this value is set. Access to the relevant information about conjugacy classes of subgroups of G –compatible with the ordering of rows and columns of the marks in `tom`– is signalled by the filter `IsTableOfMarksWithGens`

(70.10-3).

Several examples in this chapter require the **GAP** package **TomLib** (the **GAP** Library of Tables of Marks) to be available. If it is not yet loaded then we load it now.

gap> LoadPackage( "tomlib" ); true

`‣ TableOfMarks` ( G ) | ( attribute ) |

`‣ TableOfMarks` ( string ) | ( attribute ) |

`‣ TableOfMarks` ( matrix ) | ( attribute ) |

In the first form, `G` must be a finite group, and `TableOfMarks`

constructs the table of marks of `G`. This computation requires the knowledge of the complete subgroup lattice of `G` (see?`LatticeSubgroups`

(39.20-1)). If the lattice is not yet stored then it will be constructed. This may take a while if `G` is large. The result has the `IsTableOfMarksWithGens`

(70.10-3) value `true`

.

In the second form, `string` must be a string, and `TableOfMarks`

gets the table of marks with name `string` from the **GAP** library (see 70.13). If no table of marks with this name is contained in the library then `fail`

is returned.

In the third form, `matrix` must be a matrix or a list of rows describing a lower triangular matrix where the part above the diagonal is omitted. For such an argument `matrix`, `TableOfMarks`

returns a table of marks object (see?70.2) for which `matrix` is the matrix of marks. Note that not every matrix (containing only nonnegative integers and having lower triangular shape) describes a table of marks of a group. Necessary conditions are checked with `IsInternallyConsistent`

(70.9-1) (see?70.9), and `fail`

is returned if `matrix` is proved not to describe a matrix of marks; but if `TableOfMarks`

returns a table of marks object created from a matrix then it may still happen that this object does not describe the table of marks of a group.

For an overview of operations for table of marks objects, see the introduction to Chapter?70.

gap> tom:= TableOfMarks( AlternatingGroup( 5 ) ); TableOfMarks( Alt( [ 1 .. 5 ] ) ) gap> TableOfMarks( "J5" ); fail gap> a5:= TableOfMarks( "A5" ); TableOfMarks( "A5" ) gap> mat:= > [ [ 60, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 30, 2, 0, 0, 0, 0, 0, 0, 0 ], > [ 20, 0, 2, 0, 0, 0, 0, 0, 0 ], [ 15, 3, 0, 3, 0, 0, 0, 0, 0 ], > [ 12, 0, 0, 0, 2, 0, 0, 0, 0 ], [ 10, 2, 1, 0, 0, 1, 0, 0, 0 ], > [ 6, 2, 0, 0, 1, 0, 1, 0, 0 ], [ 5, 1, 2, 1, 0, 0, 0, 1, 0 ], > [ 1, 1, 1, 1, 1, 1, 1, 1, 1 ] ];; gap> TableOfMarks( mat ); TableOfMarks( <9 classes> )

The following `TableOfMarks`

methods for a group are installed.

If the group is known to be cyclic then

`TableOfMarks`

constructs the table of marks essentially without the group, instead the knowledge about the structure of cyclic groups is used.If the lattice of subgroups is already stored in the group then

`TableOfMarks`

computes the table of marks from the lattice (see?`TableOfMarksByLattice`

(70.3-2)).If the group is known to be solvable then

`TableOfMarks`

takes the lattice of subgroups (see?`LatticeSubgroups`

(39.20-1)) of the group –which means that the lattice is computed if it is not yet stored– and then computes the table of marks from it. This method is also accessible via the global function`TableOfMarksByLattice`

(70.3-2).If the group doesn't know its lattice of subgroups or its conjugacy classes of subgroups then the table of marks and the conjugacy classes of subgroups are computed at the same time by the cyclic extension method. Only the table of marks is stored because the conjugacy classes of subgroups or the lattice of subgroups can be easily read off (see?

`LatticeSubgroupsByTom`

(70.3-3)).

Conversely, the lattice of subgroups of a group with known table of marks can be computed using the table of marks, via the function `LatticeSubgroupsByTom`

(70.3-3). This is also installed as a method for `LatticeSubgroups`

(39.20-1).

`‣ TableOfMarksByLattice` ( G ) | ( function ) |

`TableOfMarksByLattice`

computes the table of marks of the group `G` from the lattice of subgroups of `G`. This lattice is computed via `LatticeSubgroups`

(39.20-1) if it is not yet stored in `G`. The function `TableOfMarksByLattice`

is installed as a method for `TableOfMarks`

(70.3-1) for solvable groups and groups with stored subgroup lattice, and is available as a global variable only in order to provide explicit access to this method.

`‣ LatticeSubgroupsByTom` ( G ) | ( function ) |

`LatticeSubgroupsByTom`

computes the lattice of subgroups of `G` from the table of marks of `G`, using `RepresentativeTom`

(70.10-4).

`‣ ViewObj` ( tom ) | ( method ) |

The default `ViewObj`

(6.3-5) method for tables of marks prints the string `"TableOfMarks"`

, followed by –if known– the identifier (see?`Identifier`

(70.7-9)) or the group of the table of marks enclosed in brackets; if neither group nor identifier are known then just the number of conjugacy classes of subgroups is printed instead.

`‣ PrintObj` ( tom ) | ( method ) |

The default `PrintObj`

(6.3-5) method for tables of marks does the same as `ViewObj`

(6.3-5), except that `PrintObj`

(6.3-5) is used for the group instead of `ViewObj`

(6.3-5).

`‣ Display` ( tom[, arec] ) | ( method ) |

The default `Display`

(6.3-6) method for a table of marks `tom` produces a formatted output of the marks in `tom`. Each line of output begins with the number of the corresponding class of subgroups. This number is repeated if the output spreads over several pages. The number of columns printed at one time depends on the actual line length, which can be accessed and changed by the function `SizeScreen`

(6.12-1).

An interactive variant of `Display`

(6.3-6) is the `Browse`

(Browse: Browse) method for tables of marks that is provided by the **GAP** package **Browse**, see `Browse`

(Browse: Browse for tables of marks).

The optional second argument `arec` of `Display`

(6.3-6) can be used to change the default style for displaying a table of marks. `arec` must be a record, its relevant components are the following.

`classes`

a list of class numbers to select only the rows and columns of the matrix that correspond to this list for printing,

`form`

one of the strings

`"subgroups"`

,`"supergroups"`

; in the former case, at position (i,j) of the matrix the number of conjugates of H_j contained in H_i is printed, and in the latter case, at position (i,j) the number of conjugates of H_i which contain H_j is printed.

gap> tom:= TableOfMarks( "A5" );; gap> Display( tom ); 1: 60 2: 30 2 3: 20 . 2 4: 15 3 . 3 5: 12 . . . 2 6: 10 2 1 . . 1 7: 6 2 . . 1 . 1 8: 5 1 2 1 . . . 1 9: 1 1 1 1 1 1 1 1 1 gap> Display( tom, rec( classes:= [ 1, 2, 3, 4, 8 ] ) ); 1: 60 2: 30 2 3: 20 . 2 4: 15 3 . 3 8: 5 1 2 1 1 gap> Display( tom, rec( form:= "subgroups" ) ); 1: 1 2: 1 1 3: 1 . 1 4: 1 3 . 1 5: 1 . . . 1 6: 1 3 1 . . 1 7: 1 5 . . 1 . 1 8: 1 3 4 1 . . . 1 9: 1 15 10 5 6 10 6 5 1 gap> Display( tom, rec( form:= "supergroups" ) ); 1: 1 2: 15 1 3: 10 . 1 4: 5 1 . 1 5: 6 . . . 1 6: 10 2 1 . . 1 7: 6 2 . . 1 . 1 8: 5 1 2 1 . . . 1 9: 1 1 1 1 1 1 1 1 1

`‣ SortedTom` ( tom, perm ) | ( operation ) |

`SortedTom`

returns a table of marks where the rows and columns of the table of marks `tom` are reordered according to the permutation `perm`.

*Note* that in each table of marks in **GAP**, the matrix of marks is assumed to have lower triangular shape (see?70.2). If the permutation `perm` does *not* have this property then the functions for tables of marks might return wrong results when applied to the output of `SortedTom`

.

The returned table of marks has only those attribute values stored that are known for `tom` and listed in `TableOfMarksComponents`

(70.6-4).

gap> tom:= TableOfMarksCyclic( 6 );; Display( tom ); 1: 6 2: 3 3 3: 2 . 2 4: 1 1 1 1 gap> sorted:= SortedTom( tom, (2,3) );; Display( sorted ); 1: 6 2: 2 2 3: 3 . 3 4: 1 1 1 1 gap> wrong:= SortedTom( tom, (1,2) );; Display( wrong ); 1: 3 2: . 6 3: . 2 2 4: 1 1 1 1

`‣ PermutationTom` ( tom ) | ( attribute ) |

For the table of marks `tom` of the group G stored as `UnderlyingGroup`

(70.7-7) value of `tom`, `PermutationTom`

is a permutation π such that the i-th conjugacy class of subgroups of G belongs to the i^π-th column and row of marks in `tom`.

This attribute value is bound only if `tom` was obtained from another table of marks by permuting with `SortedTom`

(70.5-1), and there is no default method to compute its value.

The attribute is necessary because the original and the sorted table of marks have the same identifier and the same group, and information computed from the group may depend on the ordering of marks, for example the fusion from the ordinary character table of G into `tom`.

gap> MarksTom( tom )[2]; [ 3, 3 ] gap> MarksTom( sorted )[2]; [ 2, 2 ] gap> HasPermutationTom( sorted ); true gap> PermutationTom( sorted ); (2,3)

`‣ InfoTom` | ( info class ) |

is the info class for computations concerning tables of marks.

`‣ IsTableOfMarks` ( obj ) | ( category ) |

Each table of marks belongs to this category.

`‣ TableOfMarksFamily` | ( family ) |

Each table of marks belongs to this family.

`‣ TableOfMarksComponents` | ( global variable ) |

The list `TableOfMarksComponents`

is used when a table of marks object is created from a record via `ConvertToTableOfMarks`

(70.6-5). `TableOfMarksComponents`

contains at position 2i-1 a name of an attribute and at position 2i the corresponding attribute getter function.

`‣ ConvertToTableOfMarks` ( record ) | ( function ) |

`ConvertToTableOfMarks`

converts a record with components from `TableOfMarksComponents`

(70.6-4) into a table of marks object with the corresponding attributes.

gap> record:= rec( MarksTom:= [ [ 4 ], [ 2, 2 ], [ 1, 1, 1 ] ], > SubsTom:= [ [ 1 ], [ 1, 2 ], [ 1, 2, 3 ] ] );; gap> ConvertToTableOfMarks( record );; gap> record; TableOfMarks( <3 classes> )

`‣ MarksTom` ( tom ) | ( attribute ) |

`‣ SubsTom` ( tom ) | ( attribute ) |

The matrix of marks (see?70.1) of the table of marks `tom` is stored in a compressed form where zeros are omitted, using the attributes `MarksTom`

and `SubsTom`

. If M is the square matrix of marks of `tom` (see?`MatTom`

(70.7-10)) then the `SubsTom`

value of `tom` is a list that contains at position i the list of all positions of nonzero entries of the i-th row of M, and the `MarksTom`

value of `tom` is a list that contains at position i the list of the corresponding marks.

`MarksTom`

and `SubsTom`

are defining attributes of tables of marks (see?70.2). There is no default method for computing the `SubsTom`

value, and the default `MarksTom`

method needs the values of `NrSubsTom`

(70.7-2) and `OrdersTom`

(70.7-2).

gap> a5:= TableOfMarks( "A5" ); TableOfMarks( "A5" ) gap> MarksTom( a5 ); [ [ 60 ], [ 30, 2 ], [ 20, 2 ], [ 15, 3, 3 ], [ 12, 2 ], [ 10, 2, 1, 1 ], [ 6, 2, 1, 1 ], [ 5, 1, 2, 1, 1 ], [ 1, 1, 1, 1, 1, 1, 1, 1, 1 ] ] gap> SubsTom( a5 ); [ [ 1 ], [ 1, 2 ], [ 1, 3 ], [ 1, 2, 4 ], [ 1, 5 ], [ 1, 2, 3, 6 ], [ 1, 2, 5, 7 ], [ 1, 2, 3, 4, 8 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] ]

`‣ NrSubsTom` ( tom ) | ( attribute ) |

`‣ OrdersTom` ( tom ) | ( attribute ) |

Instead of storing the marks (see?`MarksTom`

(70.7-1)) of the table of marks `tom` one can use a matrix which contains at position (i,j) the number of subgroups of conjugacy class j that are contained in one member of the conjugacy class i. These values are stored in the `NrSubsTom`

value in the same way as the marks in the `MarksTom`

(70.7-1) value.

`OrdersTom`

returns a list that contains at position i the order of a representative of the i-th conjugacy class of subgroups of `tom`.

One can compute the `NrSubsTom`

and `OrdersTom`

values from the `MarksTom`

(70.7-1) value of `tom` and vice versa.

gap> NrSubsTom( a5 ); [ [ 1 ], [ 1, 1 ], [ 1, 1 ], [ 1, 3, 1 ], [ 1, 1 ], [ 1, 3, 1, 1 ], [ 1, 5, 1, 1 ], [ 1, 3, 4, 1, 1 ], [ 1, 15, 10, 5, 6, 10, 6, 5, 1 ] ] gap> OrdersTom( a5 ); [ 1, 2, 3, 4, 5, 6, 10, 12, 60 ]

`‣ LengthsTom` ( tom ) | ( attribute ) |

For a table of marks `tom`, `LengthsTom`

returns a list of the lengths of the conjugacy classes of subgroups.

gap> LengthsTom( a5 ); [ 1, 15, 10, 5, 6, 10, 6, 5, 1 ]

`‣ ClassTypesTom` ( tom ) | ( attribute ) |

`ClassTypesTom`

distinguishes isomorphism types of the classes of subgroups of the table of marks `tom` as far as this is possible from the `SubsTom`

(70.7-1) and `MarksTom`

(70.7-1) values of `tom`.

Two subgroups are clearly not isomorphic if they have different orders. Moreover, isomorphic subgroups must contain the same number of subgroups of each type.

Each type is represented by a positive integer. `ClassTypesTom`

returns the list which contains for each class of subgroups its corresponding type.

gap> a6:= TableOfMarks( "A6" );; gap> ClassTypesTom( a6 ); [ 1, 2, 3, 3, 4, 5, 6, 6, 7, 7, 8, 9, 10, 11, 11, 12, 13, 13, 14, 15, 15, 16 ]

`‣ ClassNamesTom` ( tom ) | ( attribute ) |

`ClassNamesTom`

constructs generic names for the conjugacy classes of subgroups of the table of marks `tom`. In general, the generic name of a class of non-cyclic subgroups consists of three parts and has the form `"(`

`o``)_{`

`t``}`

`l``"`

, where `o` indicates the order of the subgroup, `t` is a number that distinguishes different types of subgroups of the same order, and `l` is a letter that distinguishes classes of subgroups of the same type and order. The type of a subgroup is determined by the numbers of its subgroups of other types (see?`ClassTypesTom`

(70.7-4)). This is slightly weaker than isomorphism.

The letter is omitted if there is only one class of subgroups of that order and type, and the type is omitted if there is only one class of that order. Moreover, the braces `{}`

around the type are omitted if the type number has only one digit.

For classes of cyclic subgroups, the parentheses round the order and the type are omitted. Hence the most general form of their generic names is `"`

. Again, the letter is omitted if there is only one class of cyclic subgroups of that order.`o`,`l`"

gap> ClassNamesTom( a6 ); [ "1", "2", "3a", "3b", "5", "4", "(4)_2a", "(4)_2b", "(6)a", "(6)b", "(8)", "(9)", "(10)", "(12)a", "(12)b", "(18)", "(24)a", "(24)b", "(36)", "(60)a", "(60)b", "(360)" ]

`‣ FusionsTom` ( tom ) | ( attribute ) |

For a table of marks `tom`, `FusionsTom`

is a list of fusions into other tables of marks. Each fusion is a list of length two, the first entry being the `Identifier`

(70.7-9)) value of the image table, the second entry being the list of images of the class positions of `tom` in the image table.

This attribute is mainly used for tables of marks in the **GAP** library (see?70.13).

gap> fus:= FusionsTom( a6 );; gap> fus[1]; [ "L3(4)", [ 1, 2, 3, 3, 14, 5, 9, 7, 15, 15, 24, 26, 27, 32, 33, 50, 57, 55, 63, 73, 77, 90 ] ]

`‣ UnderlyingGroup` ( tom ) | ( attribute ) |

`UnderlyingGroup`

is used to access an underlying group that is stored on the table of marks `tom`. There is no default method to compute an underlying group if it is not stored.

gap> UnderlyingGroup( a6 ); Group([ (1,2)(3,4), (1,2,4,5)(3,6) ])

`‣ IdempotentsTom` ( tom ) | ( attribute ) |

`‣ IdempotentsTomInfo` ( tom ) | ( attribute ) |

`IdempotentsTom`

encodes the idempotents of the integral Burnside ring described by the table of marks `tom`. The return value is a list l of positive integers such that each row vector describing a primitive idempotent has value 1 at all positions with the same entry in l, and 0 at all other positions.

According to A.?Dress?[Dre69] (see also?[Pfe97]), these idempotents correspond to the classes of perfect subgroups, and each such idempotent is the characteristic function of all those subgroups that arise by cyclic extension from the corresponding perfect subgroup (see?`CyclicExtensionsTom`

(70.9-7)).

`IdempotentsTomInfo`

returns a record with components `fixpointvectors`

and `primidems`

, both bound to lists. The i-th entry of the `fixpointvectors`

list is the 0-1-vector describing the i-th primitive idempotent, and the i-th entry of `primidems`

is the decomposition of this idempotent in the rows of `tom`.

gap> IdempotentsTom( a5 ); [ 1, 1, 1, 1, 1, 1, 1, 1, 9 ] gap> IdempotentsTomInfo( a5 ); rec( fixpointvectors := [ [ 1, 1, 1, 1, 1, 1, 1, 1, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 1 ] ], primidems := [ [ 1, -2, -1, 0, 0, 1, 1, 1 ], [ -1, 2, 1, 0, 0, -1, -1, -1, 1 ] ] )

`‣ Identifier` ( tom ) | ( attribute ) |

The identifier of a table of marks `tom` is a string. It is used for printing the table of marks (see?70.4) and in fusions between tables of marks (see?`FusionsTom`

(70.7-6)).

If `tom` is a table of marks from the **GAP** library of tables of marks (see?70.13) then it has an identifier, and if `tom` was constructed from a group with `Name`

(12.8-2) then this name is chosen as `Identifier`

value. There is no default method to compute an identifier in all other cases.

gap> Identifier( a5 ); "A5"

`‣ MatTom` ( tom ) | ( attribute ) |

`MatTom`

returns the square matrix of marks (see?70.1) of the table of marks `tom` which is stored in a compressed form using the attributes `MarksTom`

(70.7-1) and `SubsTom`

(70.7-1) This may need substantially more space than the values of `MarksTom`

(70.7-1) and `SubsTom`

(70.7-1).

gap> MatTom( a5 ); [ [ 60, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 30, 2, 0, 0, 0, 0, 0, 0, 0 ], [ 20, 0, 2, 0, 0, 0, 0, 0, 0 ], [ 15, 3, 0, 3, 0, 0, 0, 0, 0 ], [ 12, 0, 0, 0, 2, 0, 0, 0, 0 ], [ 10, 2, 1, 0, 0, 1, 0, 0, 0 ], [ 6, 2, 0, 0, 1, 0, 1, 0, 0 ], [ 5, 1, 2, 1, 0, 0, 0, 1, 0 ], [ 1, 1, 1, 1, 1, 1, 1, 1, 1 ] ]

`‣ MoebiusTom` ( tom ) | ( attribute ) |

`MoebiusTom`

computes the M?bius values both of the subgroup lattice of the group G with table of marks `tom` and of the poset of conjugacy classes of subgroups of G. It returns a record where the component `mu`

contains the M?bius values of the subgroup lattice, and the component `nu`

contains the M?bius values of the poset.

Moreover, according to an observation of Isaacs et al. (see?[HI?89], [Pah93]), the values on the subgroup lattice often can be derived from those of the poset of conjugacy classes. These "expected values" are returned in the component `ex`

, and the list of numbers of those subgroups where the expected value does not coincide with the actual value are returned in the component `hyp`

. For the computation of these values, the position of the derived subgroup of G is needed (see?`DerivedSubgroupTom`

(70.9-2)). If it is not uniquely determined then the result does not have the components `ex`

and `hyp`

.

gap> MoebiusTom( a5 ); rec( ex := [ -60, 4, 2,,, -1, -1, -1, 1 ], hyp := [ ], mu := [ -60, 4, 2,,, -1, -1, -1, 1 ], nu := [ -1, 2, 1,,, -1, -1, -1, 1 ] ) gap> tom:= TableOfMarks( "M12" );; gap> moebius:= MoebiusTom( tom );; gap> moebius.hyp; [ 1, 2, 4, 16, 39, 45, 105 ] gap> moebius.mu[1]; moebius.ex[1]; 95040 190080

`‣ WeightsTom` ( tom ) | ( attribute ) |

`WeightsTom`

extracts the *weights* from the table of marks `tom`, i.e., the diagonal entries of the matrix of marks (see?`MarksTom`

(70.7-1)), indicating the index of a subgroup in its normalizer.

gap> wt:= WeightsTom( a5 ); [ 60, 2, 2, 3, 2, 1, 1, 1, 1 ]

This information may be used to obtain the numbers of conjugate supergroups from the marks.

gap> marks:= MarksTom( a5 );; gap> List( [ 1 .. 9 ], x -> marks[x] / wt[x] ); [ [ 1 ], [ 15, 1 ], [ 10, 1 ], [ 5, 1, 1 ], [ 6, 1 ], [ 10, 2, 1, 1 ], [ 6, 2, 1, 1 ], [ 5, 1, 2, 1, 1 ], [ 1, 1, 1, 1, 1, 1, 1, 1, 1 ] ]

For a table of marks `tom` of a group G, the following properties have the same meaning as the corresponding properties for G. Additionally, if a positive integer `sub` is given as the second argument then the value of the corresponding property for the `sub`-th class of subgroups of `tom` is returned.

`‣ IsAbelianTom` ( tom[, sub] ) | ( property ) |

`‣ IsCyclicTom` ( tom[, sub] ) | ( property ) |

`‣ IsNilpotentTom` ( tom[, sub] ) | ( property ) |

`‣ IsPerfectTom` ( tom[, sub] ) | ( property ) |

`‣ IsSolvableTom` ( tom[, sub] ) | ( property ) |

gap> tom:= TableOfMarks( "A5" );; gap> IsAbelianTom( tom ); IsPerfectTom( tom ); false true gap> IsAbelianTom( tom, 3 ); IsNilpotentTom( tom, 7 ); true false gap> IsPerfectTom( tom, 7 ); IsSolvableTom( tom, 7 ); false true gap> for i in [ 1 .. 6 ] do > Print( i, ": ", IsCyclicTom(a5, i), " " ); > od; Print( "\n" ); 1: true 2: true 3: true 4: false 5: true 6: false

`‣ IsInternallyConsistent` ( tom ) | ( method ) |

For a table of marks `tom`, `IsInternallyConsistent`

decomposes all tensor products of rows of `tom`. It returns `true`

if all decomposition numbers are nonnegative integers, and `false`

otherwise. This provides a strong consistency check for a table of marks.

`‣ DerivedSubgroupTom` ( tom, sub ) | ( operation ) |

`‣ DerivedSubgroupsTom` ( tom ) | ( function ) |

For a table of marks `tom` and a positive integer `sub`, `DerivedSubgroupTom`

returns either a positive integer i or a list l of positive integers. In the former case, the result means that the derived subgroups of the subgroups in the `sub`-th class of `tom` lie in the i-th class. In the latter case, the class of the derived subgroups could not be uniquely determined, and the position of the class of derived subgroups is an entry of l.

Values computed with `DerivedSubgroupTom`

are stored using the attribute `DerivedSubgroupsTomPossible`

(70.9-3).

`DerivedSubgroupsTom`

is just the list of `DerivedSubgroupTom`

values for all values of `sub`.

`‣ DerivedSubgroupsTomPossible` ( tom ) | ( attribute ) |

`‣ DerivedSubgroupsTomUnique` ( tom ) | ( attribute ) |

Let `tom` be a table of marks. The value of the attribute `DerivedSubgroupsTomPossible`

is a list in which the value at position i –if bound– is a positive integer or a list; the meaning of the entry is the same as in `DerivedSubgroupTom`

(70.9-2).

If the value of the attribute `DerivedSubgroupsTomUnique`

is known for `tom` then it is a list of positive integers, the value at position i being the position of the class of derived subgroups of the i-th class of subgroups in `tom`.

The derived subgroups are in general not uniquely determined by the table of marks if no `UnderlyingGroup`

(70.7-7) value is stored, so there is no default method for `DerivedSubgroupsTomUnique`

. But in some cases the derived subgroups are explicitly set when the table of marks is constructed. In this case, `DerivedSubgroupTom`

(70.9-2) does not set values in the `DerivedSubgroupsTomPossible`

list.

The `DerivedSubgroupsTomUnique`

value is automatically set when the last missing unique value is entered in the `DerivedSubgroupsTomPossible`

list by `DerivedSubgroupTom`

(70.9-2).

`‣ NormalizerTom` ( tom, sub ) | ( operation ) |

`‣ NormalizersTom` ( tom ) | ( attribute ) |

Let `tom` be the table of marks of a group G, say. `NormalizerTom`

tries to find the conjugacy class of the normalizer N in G of a subgroup U in the `sub`-th class of `tom`. The return value is either the list of class numbers of those subgroups that have the right size and contain the subgroup and all subgroups that clearly contain it as a normal subgroup, or the class number of the normalizer if it is uniquely determined by these conditions. If `tom` knows the subgroup lattice of G (see?`IsTableOfMarksWithGens`

(70.10-3)) then all normalizers are uniquely determined. `NormalizerTom`

should never return an empty list.

`NormalizersTom`

returns the list of positions of the classes of normalizers of subgroups in `tom`. In addition to the criteria for a single class of subgroup used by `NormalizerTom`

, the approximations of normalizers for several classes are used and thus `NormalizersTom`

may return better approximations than `NormalizerTom`

.

gap> NormalizerTom( a5, 4 ); 8 gap> NormalizersTom( a5 ); [ 9, 4, 6, 8, 7, 6, 7, 8, 9 ]

The example shows that a subgroup with class number 4 in A_5 (which is a Kleinian four group) is normalized by a subgroup in class 8. This class contains the subgroups of A_5 which are isomorphic to A_4.

`‣ ContainedTom` ( tom, sub1, sub2 ) | ( operation ) |

`ContainedTom`

returns the number of subgroups in class `sub1` of the table of marks `tom` that are contained in one fixed member of the class `sub2`.

gap> ContainedTom( a5, 3, 5 ); ContainedTom( a5, 3, 8 ); 0 4

`‣ ContainingTom` ( tom, sub1, sub2 ) | ( operation ) |

`ContainingTom`

returns the number of subgroups in class `sub2` of the table of marks `tom` that contain one fixed member of the class `sub1`.

gap> ContainingTom( a5, 3, 5 ); ContainingTom( a5, 3, 8 ); 0 2

`‣ CyclicExtensionsTom` ( tom, p ) | ( operation ) |

`‣ CyclicExtensionsTom` ( tom[, list] ) | ( attribute ) |

According to A.?Dress?[Dre69], two columns of the table of marks `tom` are equal modulo the prime `p` if and only if the corresponding subgroups are connected by a chain of normal extensions of order `p`.

Called with `tom` and `p`, `CyclicExtensionsTom`

returns the classes of this equivalence relation.

In the second form, `list` must be a list of primes, and the return value is the list of classes of the relation obtained by considering chains of normal extensions of prime order where all primes are in `list`. The default value for `list` is the set of prime divisors of the order of the group of `tom`.

(This information is *not* used by `NormalizerTom`

(70.9-4) although it might give additional restrictions in the search of normalizers.)

gap> CyclicExtensionsTom( a5, 2 ); [ [ 1, 2, 4 ], [ 3, 6 ], [ 5, 7 ], [ 8 ], [ 9 ] ]

`‣ DecomposedFixedPointVector` ( tom, fix ) | ( operation ) |

Let `tom` be the table of marks of the group G, say, and let `fix` be a vector of fixed point numbers w.r.t.?an action of G, i.e., a vector which contains for each class of subgroups the number of fixed points under the given action. `DecomposedFixedPointVector`

returns the decomposition of `fix` into rows of the table of marks. This decomposition corresponds to a decomposition of the action into transitive constituents. Trailing zeros in `fix` may be omitted.

gap> DecomposedFixedPointVector( a5, [ 16, 4, 1, 0, 1, 1, 1 ] ); [ 0, 0, 0, 0, 0, 1, 1 ]

The vector `fix` may be any vector of integers. The resulting decomposition, however, will not be integral, in general.

gap> DecomposedFixedPointVector( a5, [ 0, 0, 0, 0, 1, 1 ] ); [ 2/5, -1, -1/2, 0, 1/2, 1 ]

`‣ EulerianFunctionByTom` ( tom, n[, sub] ) | ( operation ) |

Called with two arguments, `EulerianFunctionByTom`

computes the Eulerian function (see?`EulerianFunction`

(39.16-3)) of the underlying group G of the table of marks `tom`, that is, the number of `n`-tuples of elements in G that generate G. If the optional argument `sub` is given then `EulerianFunctionByTom`

computes the Eulerian function of each subgroup in the `sub`-th class of subgroups of `tom`.

For a group G whose table of marks is known, `EulerianFunctionByTom`

is installed as a method for `EulerianFunction`

(39.16-3).

gap> EulerianFunctionByTom( a5, 2 ); 2280 gap> EulerianFunctionByTom( a5, 3 ); 200160 gap> EulerianFunctionByTom( a5, 2, 3 ); 8

`‣ IntersectionsTom` ( tom, sub1, sub2 ) | ( operation ) |

The intersections of the groups in the `sub1`-th conjugacy class of subgroups of the table of marks `tom` with the groups in the `sub2`-th conjugacy classes of subgroups of `tom` are determined up to conjugacy by the decomposition of the tensor product of their rows of marks. `IntersectionsTom`

returns a list l that describes this decomposition. The i-th entry in l is the multiplicity of groups in the i-th conjugacy class as an intersection.

gap> IntersectionsTom( a5, 8, 8 ); [ 0, 0, 1, 0, 0, 0, 0, 1 ]

Any two subgroups of class number 8 (A_4) of A_5 are either equal and their intersection has again class number 8, or their intersection has class number 3, and is a cyclic subgroup of order 3.

`‣ FactorGroupTom` ( tom, n ) | ( operation ) |

For a table of marks `tom` of the group G, say, and the normal subgroup N of G corresponding to the `n`-th class of subgroups of `tom`, `FactorGroupTom`

returns the table of marks of the factor group G / N.

gap> s4:= TableOfMarks( SymmetricGroup( 4 ) ); TableOfMarks( Sym( [ 1 .. 4 ] ) ) gap> LengthsTom( s4 ); [ 1, 3, 6, 4, 1, 3, 3, 4, 3, 1, 1 ] gap> OrdersTom( s4 ); [ 1, 2, 2, 3, 4, 4, 4, 6, 8, 12, 24 ] gap> s3:= FactorGroupTom( s4, 5 ); TableOfMarks( Group([ f1, f2 ]) ) gap> Display( s3 ); 1: 6 2: 3 1 3: 2 . 2 4: 1 1 1 1

`‣ MaximalSubgroupsTom` ( tom[, sub] ) | ( attribute ) |

Called with a table of marks `tom`, `MaximalSubgroupsTom`

returns a list of length two, the first entry being the list of positions of the classes of maximal subgroups of the whole group of `tom`, the second entry being the list of class lengths of these groups.

Called with a table of marks `tom` and a position `sub`, the same information for the `sub`-th class of subgroups is returned.

gap> MaximalSubgroupsTom( s4 ); [ [ 10, 9, 8 ], [ 1, 3, 4 ] ] gap> MaximalSubgroupsTom( s4, 10 ); [ [ 5, 4 ], [ 1, 4 ] ]

`‣ MinimalSupergroupsTom` ( tom, sub ) | ( operation ) |

For a table of marks `tom`, `MinimalSupergroupsTom`

returns a list of length two, the first entry being the list of positions of the classes containing the minimal supergroups of the groups in the `sub`-th class of subgroups of `tom`, the second entry being the list of class lengths of these groups.

gap> MinimalSupergroupsTom( s4, 5 ); [ [ 9, 10 ], [ 3, 1 ] ]

Let `tom` be the table of marks of the group G, and assume that `tom` has access to G via the `UnderlyingGroup`

(70.7-7) value. Then it makes sense to use `tom` and its ordering of conjugacy classes of subgroups of G for storing information for constructing representatives of these classes. The group G is in general not sufficient for this, `tom` needs more information; this is available if and only if the `IsTableOfMarksWithGens`

(70.10-3) value of `tom` is `true`

. In this case, `RepresentativeTom`

(70.10-4) can be used to get a subgroup of the i-th class, for all i.

**GAP** provides two different possibilities to store generators of the representatives of classes of subgroups. The first is implemented by the attribute `GeneratorsSubgroupsTom`

(70.10-1), which uses explicit generators of the subgroups. The second, more general, possibility is implemented by the attribute `StraightLineProgramsTom`

(70.10-2), which encodes the generators as straight line programs (see?37.8) that evaluate to the generators in question when applied to *standard generators* of G. This means that on the one hand, standard generators of G must be known in order to use `StraightLineProgramsTom`

(70.10-2). On the other hand, the straight line programs allow one to compute easily generators not only of a subgroup U of G but also generators of the image of U in any representation of G, provided that one knows standard generators of the image of G under this representation. See the manual of the package **TomLib** for details and an example.

`‣ GeneratorsSubgroupsTom` ( tom ) | ( attribute ) |

Let `tom` be a table of marks with `IsTableOfMarksWithGens`

(70.10-3) value `true`

. Then `GeneratorsSubgroupsTom`

returns a list of length two, the first entry being a list l of elements of the group stored as `UnderlyingGroup`

(70.7-7) value of `tom`, the second entry being a list that contains at position i a list of positions in l of generators of a representative of a subgroup in class i.

The `GeneratorsSubgroupsTom`

value is known for all tables of marks that have been computed with `TableOfMarks`

(70.3-1) from a group, and there is a method to compute the value for a table of marks that admits `RepresentativeTom`

(70.10-4).

`‣ StraightLineProgramsTom` ( tom ) | ( attribute ) |

For a table of marks `tom` with `IsTableOfMarksWithGens`

(70.10-3) value `true`

, `StraightLineProgramsTom`

returns a list that contains at position i either a list of straight line programs or a straight line program (see?37.8), encoding the generators of a representative of the i-th conjugacy class of subgroups of `UnderlyingGroup( `

; in the former case, each straight line program returns a generator, in the latter case, the program returns the list of generators.`tom` )

There is no default method to compute the `StraightLineProgramsTom`

value of a table of marks if they are not yet stored. The value is known for all tables of marks that belong to the **GAP** library of tables of marks (see?70.13).

`‣ IsTableOfMarksWithGens` ( tom ) | ( filter ) |

This filter shall express the union of the filters `IsTableOfMarks and HasStraightLineProgramsTom`

and `IsTableOfMarks and HasGeneratorsSubgroupsTom`

. If a table of marks `tom` has this filter set then `tom` can be asked to compute information that is in general not uniquely determined by a table of marks, for example the positions of derived subgroups or normalizers of subgroups (see?`DerivedSubgroupTom`

(70.9-2), `NormalizerTom`

(70.9-4)).

gap> a5:= TableOfMarks( "A5" );; IsTableOfMarksWithGens( a5 ); true gap> HasGeneratorsSubgroupsTom( a5 ); HasStraightLineProgramsTom( a5 ); false true gap> alt5:= TableOfMarks( AlternatingGroup( 5 ) );; gap> IsTableOfMarksWithGens( alt5 ); true gap> HasGeneratorsSubgroupsTom(alt5); HasStraightLineProgramsTom(alt5); true false gap> progs:= StraightLineProgramsTom( a5 );; gap> OrdersTom( a5 ); [ 1, 2, 3, 4, 5, 6, 10, 12, 60 ] gap> IsCyclicTom( a5, 4 ); false gap> Length( progs[4] ); 2 gap> progs[4][1]; <straight line program> gap> # first generator of an el. ab group of order 4: gap> Display( progs[4][1] ); # input: r:= [ g1, g2 ]; # program: r[3]:= r[2]*r[1]; r[4]:= r[3]*r[2]^-1*r[1]*r[3]*r[2]^-1*r[1]*r[2]; # return value: r[4] gap> x:= [ [ Z(2)^0, 0*Z(2) ], [ Z(2^2), Z(2)^0 ] ];; gap> y:= [ [ Z(2^2), Z(2)^0 ], [ 0*Z(2), Z(2^2)^2 ] ];; gap> res1:= ResultOfStraightLineProgram( progs[4][1], [ x, y ] ); [ [ Z(2)^0, 0*Z(2) ], [ Z(2^2)^2, Z(2)^0 ] ] gap> res2:= ResultOfStraightLineProgram( progs[4][2], [ x, y ] ); [ [ Z(2)^0, 0*Z(2) ], [ Z(2^2), Z(2)^0 ] ] gap> w:= y*x;; gap> res1 = w*y^-1*x*w*y^-1*x*y; true gap> subgrp:= Group( res1, res2 );; Size( subgrp ); IsCyclic( subgrp ); 4 false

`‣ RepresentativeTom` ( tom, sub ) | ( operation ) |

`‣ RepresentativeTomByGenerators` ( tom, sub, gens ) | ( operation ) |

`‣ RepresentativeTomByGeneratorsNC` ( tom, sub, gens ) | ( operation ) |

Let `tom` be a table of marks with `IsTableOfMarksWithGens`

(70.10-3) value `true`

, and `sub` a positive integer. `RepresentativeTom`

returns a representative of the `sub`-th conjugacy class of subgroups of `tom`.

If the attribute `StraightLineProgramsTom`

(70.10-2) is set in `tom` then methods for the operations `RepresentativeTomByGenerators`

and `RepresentativeTomByGeneratorsNC`

are available, which return a representative of the `sub`-th conjugacy class of subgroups of `tom`, as a subgroup of the group generated by `gens`. This means that the standard generators of `tom` are replaced by `gens`.

`RepresentativeTomByGenerators`

checks whether mapping the standard generators of `tom` to `gens` extends to a group isomorphism, and returns `fail`

if not. `RepresentativeTomByGeneratorsNC`

omits all checks. So `RepresentativeTomByGenerators`

is thought mainly for debugging purposes; note that when several representatives are constructed, it is cheaper to construct (and check) the isomorphism once, and to map the groups returned by `RepresentativeTom`

under this isomorphism. The idea behind `RepresentativeTomByGeneratorsNC`

, however, is to avoid the overhead of using isomorphisms when `gens` are known to be standard generators. In order to proceed like this, the attribute `StraightLineProgramsTom`

(70.10-2) is needed.

gap> RepresentativeTom( a5, 4 ); Group([ (2,3)(4,5), (2,4)(3,5) ])

The following examples require the **GAP** Character Table Library to be available. If it is not yet loaded then we load it now.

gap> LoadPackage( "ctbllib" ); true

`‣ FusionCharTableTom` ( tbl, tom ) | ( operation ) |

`‣ PossibleFusionsCharTableTom` ( tbl, tom[, options] ) | ( operation ) |

Let `tbl` be the ordinary character table of the group G, say, and `tom` the table of marks of G. `FusionCharTableTom`

determines the fusion of the classes of elements from `tbl` to the classes of cyclic subgroups on `tom`, that is, a list that contains at position i the position of the class of cyclic subgroups in `tom` that are generated by elements in the i-th conjugacy class of elements in `tbl`.

Three cases are handled differently.

The fusion is explicitly stored on

`tbl`. Then nothing has to be done. This happens only if both`tbl`and`tom`are tables from the**GAP**library (see?70.13 and the manual of the**GAP**Character Table Library).The

`UnderlyingGroup`

(70.7-7) values of`tbl`and`tom`are known and equal. Then the group is used to compute the fusion.There is neither fusion nor group information available. In this case only necessary conditions can be checked, and if they are not sufficient to determine the fusion uniquely then

`fail`

is returned by`FusionCharTableTom`

.

`PossibleFusionsCharTableTom`

computes the list of possible fusions from `tbl` to `tom`, according to the criteria that have been checked. So if `FusionCharTableTom`

returns a unique fusion then the list returned by `PossibleFusionsCharTableTom`

for the same arguments contains exactly this fusion, and if `FusionCharTableTom`

returns `fail`

then the length of this list is different from 1.

The optional argument `options` must be a record that may have the following components.

`fusionmap`

a parametrized map which is an approximation of the desired map,

`quick`

a Boolean; if

`true`

then as soon as only one possibility remains this possibility is returned immediately; the default value is`false`

.

gap> a5c:= CharacterTable( "A5" );; gap> fus:= FusionCharTableTom( a5c, a5 ); [ 1, 2, 3, 5, 5 ]

`‣ PermCharsTom` ( fus, tom ) | ( operation ) |

`‣ PermCharsTom` ( tbl, tom ) | ( operation ) |

`PermCharsTom`

returns the list of transitive permutation characters from the table of marks `tom`. In the first form, `fus` must be the fusion map from the ordinary character table of the group of `tom` to `tom` (see?`FusionCharTableTom`

(70.11-1)). In the second form, `tbl` must be the character table of the group of which `tom` is the table of marks. If the fusion map is not uniquely determined (see?`FusionCharTableTom`

(70.11-1)) then `fail`

is returned.

If the fusion map `fus` is given as first argument then each transitive permutation character is represented by its values list. If the character table `tbl` is given then the permutation characters are class function objects (see Chapter?72).

gap> PermCharsTom( a5c, a5 ); [ Character( CharacterTable( "A5" ), [ 60, 0, 0, 0, 0 ] ), Character( CharacterTable( "A5" ), [ 30, 2, 0, 0, 0 ] ), Character( CharacterTable( "A5" ), [ 20, 0, 2, 0, 0 ] ), Character( CharacterTable( "A5" ), [ 15, 3, 0, 0, 0 ] ), Character( CharacterTable( "A5" ), [ 12, 0, 0, 2, 2 ] ), Character( CharacterTable( "A5" ), [ 10, 2, 1, 0, 0 ] ), Character( CharacterTable( "A5" ), [ 6, 2, 0, 1, 1 ] ), Character( CharacterTable( "A5" ), [ 5, 1, 2, 0, 0 ] ), Character( CharacterTable( "A5" ), [ 1, 1, 1, 1, 1 ] ) ] gap> PermCharsTom( fus, a5 )[1]; [ 60, 0, 0, 0, 0 ]

The following three operations construct a table of marks only from the data given, i.e., without underlying group.

`‣ TableOfMarksCyclic` ( n ) | ( operation ) |

`TableOfMarksCyclic`

returns the table of marks of the cyclic group of order `n`.

A cyclic group of order `n` has as its subgroups for each divisor d of `n` a cyclic subgroup of order d.

gap> Display( TableOfMarksCyclic( 6 ) ); 1: 6 2: 3 3 3: 2 . 2 4: 1 1 1 1

`‣ TableOfMarksDihedral` ( n ) | ( operation ) |

`TableOfMarksDihedral`

returns the table of marks of the dihedral group of order `m`.

For each divisor d of `m`, a dihedral group of order m = 2n contains subgroups of order d according to the following rule. If d is odd and divides n then there is only one cyclic subgroup of order d. If d is even and divides n then there are a cyclic subgroup of order d and two classes of dihedral subgroups of order d (which are cyclic, too, in the case d = 2, see the example below). Otherwise (i.e., if d does not divide n) there is just one class of dihedral subgroups of order d.

gap> Display( TableOfMarksDihedral( 12 ) ); 1: 12 2: 6 6 3: 6 . 2 4: 6 . . 2 5: 4 . . . 4 6: 3 3 1 1 . 1 7: 2 2 . . 2 . 2 8: 2 . 2 . 2 . . 2 9: 2 . . 2 2 . . . 2 10: 1 1 1 1 1 1 1 1 1 1

`‣ TableOfMarksFrobenius` ( p, q ) | ( operation ) |

`TableOfMarksFrobenius`

computes the table of marks of a Frobenius group of order p q, where p is a prime and q divides p-1.

gap> Display( TableOfMarksFrobenius( 5, 4 ) ); 1: 20 2: 10 2 3: 5 1 1 4: 4 . . 4 5: 2 2 . 2 2 6: 1 1 1 1 1 1

The **GAP** package **TomLib** provides access to several hundred tables of marks of almost simple groups and their maximal subgroups. If this package is installed then the tables from this database can be accessed via `TableOfMarks`

(70.3-1) with argument a string. If also the **GAP** Character Table Library is installed and contains the ordinary character table of the group for which one wants to fetch the table of marks then one can also call `TableOfMarks`

(70.3-1) with argument the character table.

A list of all names of tables of marks that are provided by the **TomLib** package can be obtained via `AllLibTomNames`

(TomLib: AllLibTomNames).

gap> names:= AllLibTomNames();; gap> "A5" in names; true

Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Bib Ind

generated by GAPDoc2HTML

王中王中特免费公开资料选料