Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Bib Ind

66 Polynomials and Rational Functions

66.4 Properties and Attributes of Rational Functions

66.4-1 IsPolynomialFunction

66.4-2 NumeratorOfRationalFunction

66.4-3 DenominatorOfRationalFunction

66.4-4 IsPolynomial

66.4-5 AsPolynomial

66.4-6 IsUnivariateRationalFunction

66.4-7 CoefficientsOfUnivariateRationalFunction

66.4-8 IsUnivariatePolynomial

66.4-9 CoefficientsOfUnivariatePolynomial

66.4-10 IsLaurentPolynomial

66.4-11 IsConstantRationalFunction

66.4-12 IsPrimitivePolynomial

66.4-13 SplittingField

66.4-1 IsPolynomialFunction

66.4-2 NumeratorOfRationalFunction

66.4-3 DenominatorOfRationalFunction

66.4-4 IsPolynomial

66.4-5 AsPolynomial

66.4-6 IsUnivariateRationalFunction

66.4-7 CoefficientsOfUnivariateRationalFunction

66.4-8 IsUnivariatePolynomial

66.4-9 CoefficientsOfUnivariatePolynomial

66.4-10 IsLaurentPolynomial

66.4-11 IsConstantRationalFunction

66.4-12 IsPrimitivePolynomial

66.4-13 SplittingField

66.17 Monomial Orderings

66.17-1 IsMonomialOrdering

66.17-2 LeadingMonomialOfPolynomial

66.17-3 LeadingTermOfPolynomial

66.17-4 LeadingCoefficientOfPolynomial

66.17-5 MonomialComparisonFunction

66.17-6 MonomialExtrepComparisonFun

66.17-7 MonomialLexOrdering

66.17-8 MonomialGrlexOrdering

66.17-9 MonomialGrevlexOrdering

66.17-10 EliminationOrdering

66.17-11 PolynomialReduction

66.17-12 PolynomialReducedRemainder

66.17-13 PolynomialDivisionAlgorithm

66.17-14 MonomialExtGrlexLess

66.17-1 IsMonomialOrdering

66.17-2 LeadingMonomialOfPolynomial

66.17-3 LeadingTermOfPolynomial

66.17-4 LeadingCoefficientOfPolynomial

66.17-5 MonomialComparisonFunction

66.17-6 MonomialExtrepComparisonFun

66.17-7 MonomialLexOrdering

66.17-8 MonomialGrlexOrdering

66.17-9 MonomialGrevlexOrdering

66.17-10 EliminationOrdering

66.17-11 PolynomialReduction

66.17-12 PolynomialReducedRemainder

66.17-13 PolynomialDivisionAlgorithm

66.17-14 MonomialExtGrlexLess

Let R be a commutative ring-with-one. We call a free associative algebra A over R a *polynomial ring* over R. The free generators of A are called *indeterminates* (to avoid naming conflicts with the word *variables* which will be used to denote **GAP** variables only) , they are usually denoted by x_1, x_2, .... The number of indeterminates is called the *rank* of A. The elements of A are called *polynomials*. Products of indeterminates are called *monomials*, every polynomial can be expressed as a finite sum of products of monomials with ring elements in a form like r_{1,0} x_1 + r_{1,1} x_1 x_2 + r_{0,1} x_2 + ? with r_{i,j} ∈ R.

A polynomial ring of rank 1 is called an *univariate* polynomial ring, its elements are *univariate polynomials*.

Polynomial rings of smaller rank naturally embed in rings of higher rank; if S is a subring of R then a polynomial ring over S naturally embeds in a polynomial ring over R of the same rank. Note however that **GAP** does not consider R as a subset of a polynomial ring over R; for example the zero of R (0) and the zero of the polynomial ring (0x^0) are different objects.

Internally, indeterminates are represented by positive integers, but it is possible to give names to them to have them printed in a nicer way. Beware, however that there is not necessarily any relation between the way an indeterminate is called and the way it is printed. See section 66.1 for details.

If R is an integral domain, the polynomial ring A over R is an integral domain as well and one can therefore form its quotient field Q. This field is called a *field of rational functions*. Again A embeds naturally into Q and **GAP** will perform this embedding implicitly. (In fact it implements the ring of rational functions over R.) To avoid problems with leading coefficients, however, R must be a unique factorization domain.

Internally, indeterminates are created for a *family* of objects (for example all elements of finite fields in characteristic 3 are in one family). Thus a variable "x" over the rationals is also an "x" over the integers, while an "x" over `GF(3)`

is different.

Within one family, every indeterminate has a number `nr` and as long as no other names have been assigned, this indeterminate will be displayed as "`x_`

". Indeterminate numbers can be arbitrary nonnegative integers.`nr`

It is possible to assign names to indeterminates; these names are strings and only provide a means for printing the indeterminates in a nice way. Indeterminates that have not been assigned a name will be printed as "`x_`

".`nr`

(Because of this printing convention, the name `x_`

is interpreted specially to always denote the variable with internal number `nr``nr`.)

The indeterminate names have not necessarily any relations to variable names: this means that an indeterminate whose name is, say, "`x`

" cannot be accessed using the variable `x`

, unless `x`

was defined to be that indeterminate.

When asking for indeterminates with certain names, **GAP** usually will take the first (with respect to the internal numbering) indeterminates that are not yet named, name these accordingly and return them. Thus when asking for named indeterminates, no relation between names and indeterminate numbers can be guaranteed. The attribute `IndeterminateNumberOfLaurentPolynomial(`

will return the number of the indeterminate `indet`)`indet`.

When asked to create an indeterminate with a name that exists already for the family, **GAP** will by default return this existing indeterminate. If you explicitly want a *new* indeterminate, distinct from the already existing one with the *same* name, you can add the `new`

option to the function call. (This is in most cases not a good idea.)

gap> R:=PolynomialRing(GF(3),["x","y","z"]); GF(3)[x,y,z] gap> List(IndeterminatesOfPolynomialRing(R), > IndeterminateNumberOfLaurentPolynomial); [ 1, 2, 3 ] gap> R:=PolynomialRing(GF(3),["z"]); GF(3)[z] gap> List(IndeterminatesOfPolynomialRing(R), > IndeterminateNumberOfLaurentPolynomial); [ 3 ] gap> R:=PolynomialRing(GF(3),["x","y","z"]:new); GF(3)[x,y,z] gap> List(IndeterminatesOfPolynomialRing(R), > IndeterminateNumberOfLaurentPolynomial); [ 4, 5, 6 ] gap> R:=PolynomialRing(GF(3),["z"]); GF(3)[z] gap> List(IndeterminatesOfPolynomialRing(R), > IndeterminateNumberOfLaurentPolynomial); [ 3 ]

`‣ Indeterminate` ( R[, nr] ) | ( operation ) |

`‣ Indeterminate` ( R[, name][, avoid] ) | ( operation ) |

`‣ Indeterminate` ( fam, nr ) | ( operation ) |

`‣ X` ( R[, nr] ) | ( operation ) |

`‣ X` ( R[, name][, avoid] ) | ( operation ) |

`‣ X` ( fam, nr ) | ( operation ) |

returns the indeterminate number `nr` over the ring `R`. If `nr` is not given it defaults to 1. If the number is not specified a list `avoid` of indeterminates may be given. The function will return an indeterminate that is guaranteed to be different from all the indeterminates in the list `avoid`. The third usage returns an indeterminate called `name` (also avoiding the indeterminates in `avoid` if given).

`X`

is simply a synonym for `Indeterminate`

.

gap> x:=Indeterminate(GF(3),"x"); x gap> y:=X(GF(3),"y");z:=X(GF(3),"X"); y X gap> X(GF(3),2); y gap> X(GF(3),"x_3"); X gap> X(GF(3),[y,z]); x

`‣ IndeterminateNumberOfUnivariateRationalFunction` ( rfun ) | ( attribute ) |

returns the number of the indeterminate in which the univariate rational function `rfun` is expressed. (This also provides a way to obtain the number of a given indeterminate.)

A constant rational function might not possess an indeterminate number. In this case `IndeterminateNumberOfUnivariateRationalFunction`

will default to a value of 1. Therefore two univariate polynomials may be considered to be in the same univariate polynomial ring if their indeterminates have the same number or one if of them is constant. (see also?`CIUnivPols`

(66.1-5) and?`IsLaurentPolynomialDefaultRep`

(66.21-7)).

`‣ IndeterminateOfUnivariateRationalFunction` ( rfun ) | ( attribute ) |

returns the indeterminate in which the univariate rational function `rfun` is expressed. (cf. `IndeterminateNumberOfUnivariateRationalFunction`

(66.1-2).)

gap> IndeterminateNumberOfUnivariateRationalFunction(z); 3 gap> IndeterminateOfUnivariateRationalFunction(z^5+z); X

`‣ IndeterminateName` ( fam, nr ) | ( operation ) |

`‣ HasIndeterminateName` ( fam, nr ) | ( operation ) |

`‣ SetIndeterminateName` ( fam, nr, name ) | ( operation ) |

`SetIndeterminateName`

assigns the name `name` to indeterminate `nr` in the rational functions family `fam`. It issues an error if the indeterminate was already named.

`IndeterminateName`

returns the name of the `nr`-th indeterminate (and returns `fail`

if no name has been assigned).

`HasIndeterminateName`

tests whether indeterminate `nr` has already been assigned a name.

gap> IndeterminateName(FamilyObj(x),2); "y" gap> HasIndeterminateName(FamilyObj(x),4); false gap> SetIndeterminateName(FamilyObj(x),10,"bla"); gap> Indeterminate(GF(3),10); bla

As a convenience there is a special method installed for `SetName`

that will assign a name to an indeterminate.

gap> a:=Indeterminate(GF(3),5); x_5 gap> SetName(a,"ah"); gap> a^5+a; ah^5+ah

`‣ CIUnivPols` ( upol1, upol2 ) | ( function ) |

This function (whose name stands for "common indeterminate of univariate polynomials") takes two univariate polynomials as arguments. If both polynomials are given in the same indeterminate number `indnum` (in this case they are "compatible" as univariate polynomials) it returns `indnum`. In all other cases it returns `fail`

. `CIUnivPols`

also accepts if either polynomial is constant but formally expressed in another indeterminate, in this situation the indeterminate of the other polynomial is selected.

The rational functions form a field, therefore all arithmetic operations are applicable to rational functions.

`f` + `g`

`f` - `g`

`f` * `g`

`f` / `g`

gap> x:=Indeterminate(Rationals,1);;y:=Indeterminate(Rationals,2);; gap> f:=3+x*y+x^5;;g:=5+x^2*y+x*y^2;; gap> a:=g/f; (x_1^2*x_2+x_1*x_2^2+5)/(x_1^5+x_1*x_2+3)

Note that the quotient

of two polynomials might be represented as a rational function again. If `f`/`g``g` is known to divide `f` the call `Quotient(`

(see?`f`,`g`)`Quotient`

(56.1-9)) should be used instead.

`f` mod `g`

For two Laurent polynomials `f` and `g`,

is the Euclidean remainder (see?`f` mod `g``EuclideanRemainder`

(56.6-4)) of `f` modulo `g`.

As calculating a multivariate Gcd can be expensive, it is not guaranteed that rational functions will always be represented as a quotient of coprime polynomials. In certain unfortunate situations this might lead to a degree explosion. To ensure cancellation you can use `Gcd`

(56.7-1) on the `NumeratorOfRationalFunction`

(66.4-2) and `DenominatorOfRationalFunction`

(66.4-3) values of a given rational function.

All polynomials as well as all the univariate polynomials in the same indeterminate form subrings of this field. If two rational functions are known to be in the same subring, the result will be expressed as element in this subring.

`f` = `g`

Two rational functions `f` and `g` are equal if the product `Numerator(`

equals `f`) * Denominator(`g`)`Numerator(`

.`g`) * Denominator(`f`)

gap> x:=Indeterminate(Rationals,"x");;y:=Indeterminate(Rationals,"y");; gap> f:=3+x*y+x^5;;g:=5+x^2*y+x*y^2;; gap> a:=g/f; (x^2*y+x*y^2+5)/(x^5+x*y+3) gap> b:=(g*f)/(f^2); (x^7*y+x^6*y^2+5*x^5+x^3*y^2+x^2*y^3+3*x^2*y+3*x*y^2+5*x*y+15)/(x^10+2\ *x^6*y+6*x^5+x^2*y^2+6*x*y+9) gap> a=b; true

`f` < `g`

The ordering of rational functions is defined in several steps. Monomials (products of indeterminates) are sorted first by degree, then lexicographically (with x_1>x_2) (see?`MonomialGrlexOrdering`

(66.17-8)). Products of monomials with ring elements ("terms") are compared first by their monomials and then by their coefficients.

gap> x>y; true gap> x^2*y<x*y^2; false gap> x*y<x^2*y; true gap> x^2*y < 5* y*x^2; true

Polynomials are compared by comparing the largest terms in turn until they differ.

gap> x+y<y; false gap> x<x+1; true

Rational functions are compared by comparing the polynomial `Numerator(`

with the polynomial `f`) * Denominator(`g`)`Numerator(`

. (As the ordering of monomials used by `g`) * Denominator(`f`)**GAP** is invariant under multiplication this is independent of common factors in numerator and denominator.)

gap> f/g<g/f; false gap> f/g<(g*g)/(f*g); false

For univariate polynomials this reduces to an ordering first by total degree and then lexicographically on the coefficients.

All these tests are applicable to *every* rational function. Depending on the internal representation of the rational function, however some of these tests (in particular, univariateness) might be expensive in some cases.

For reasons of performance within algorithms it can be useful to use other attributes, which give a slightly more technical representation. See section?66.20 for details.

`‣ IsPolynomialFunction` ( obj ) | ( category ) |

`‣ IsRationalFunction` ( obj ) | ( category ) |

A rational function is an element of the quotient field of a polynomial ring over an UFD. It is represented as a quotient of two polynomials, its numerator (see?`NumeratorOfRationalFunction`

(66.4-2)) and its denominator (see?`DenominatorOfRationalFunction`

(66.4-3))

A polynomial function is an element of a polynomial ring (not necessarily an UFD), or a rational function.

**GAP** considers `IsRationalFunction`

as a subcategory of `IsPolynomialFunction`

.

`‣ NumeratorOfRationalFunction` ( ratfun ) | ( attribute ) |

returns the numerator of the rational function `ratfun`.

As no proper multivariate gcd has been implemented yet, numerators and denominators are not guaranteed to be reduced!

`‣ DenominatorOfRationalFunction` ( ratfun ) | ( attribute ) |

returns the denominator of the rational function `ratfun`.

As no proper multivariate gcd has been implemented yet, numerators and denominators are not guaranteed to be reduced!

gap> x:=Indeterminate(Rationals,1);;y:=Indeterminate(Rationals,2);; gap> DenominatorOfRationalFunction((x*y+x^2)/y); y gap> NumeratorOfRationalFunction((x*y+x^2)/y); x^2+x*y

`‣ IsPolynomial` ( ratfun ) | ( property ) |

A polynomial is a rational function whose denominator is one. (If the coefficients family forms a field this is equivalent to the denominator being constant.)

If the base family is not a field, it may be impossible to represent the quotient of a polynomial by a ring element as a polynomial again, but it will have to be represented as a rational function.

gap> IsPolynomial((x*y+x^2*y^3)/y); true gap> IsPolynomial((x*y+x^2)/y); false

`‣ AsPolynomial` ( poly ) | ( attribute ) |

If `poly` is a rational function that is a polynomial this attribute returns an equal rational function p such that p is equal to its numerator and the denominator of p is one.

gap> AsPolynomial((x*y+x^2*y^3)/y); x^2*y^2+x

`‣ IsUnivariateRationalFunction` ( ratfun ) | ( property ) |

A rational function is univariate if its numerator and its denominator are both polynomials in the same one indeterminate. The attribute `IndeterminateNumberOfUnivariateRationalFunction`

(66.1-2) can be used to obtain the number of this common indeterminate.

`‣ CoefficientsOfUnivariateRationalFunction` ( rfun ) | ( attribute ) |

if `rfun` is a univariate rational function, this attribute returns a list `[ `

where `ncof`, `dcof`, `val` ]`ncof` and `dcof` are coefficient lists of univariate polynomials `n` and `d` and a valuation `val` such that `rfun` = x^`val` ? `n` / `d` where x is the variable with the number given by `IndeterminateNumberOfUnivariateRationalFunction`

(66.1-2). Numerator and denominator are guaranteed to be cancelled.

`‣ IsUnivariatePolynomial` ( ratfun ) | ( property ) |

A univariate polynomial is a polynomial in only one indeterminate.

`‣ CoefficientsOfUnivariatePolynomial` ( pol ) | ( attribute ) |

`CoefficientsOfUnivariatePolynomial`

returns the coefficient list of the polynomial `pol`, sorted in ascending order. (It returns the empty list if `pol` is 0.)

`‣ IsLaurentPolynomial` ( ratfun ) | ( property ) |

A Laurent polynomial is a univariate rational function whose denominator is a monomial. Therefore every univariate polynomial is a Laurent polynomial.

The attribute `CoefficientsOfLaurentPolynomial`

(66.13-2) gives a compact representation as Laurent polynomial.

`‣ IsConstantRationalFunction` ( ratfun ) | ( property ) |

A constant rational function is a function whose numerator and denominator are polynomials of degree 0.

`‣ IsPrimitivePolynomial` ( F, pol ) | ( operation ) |

For a univariate polynomial `pol` of degree d in the indeterminate X, with coefficients in a finite field `F` with q elements, say, `IsPrimitivePolynomial`

returns `true`

if

`pol`divides X^{q^d-1} - 1, andfor each prime divisor p of q^d - 1,

`pol`does not divide X^{(q^d-1)/p} - 1,

and `false`

otherwise.

`‣ SplittingField` ( f ) | ( attribute ) |

returns the smallest field which contains the coefficients of `f` and the roots of `f`.

Some of the operations are actually defined on the larger domain of Laurent polynomials (see 66.13). For this section you can simply ignore the word "Laurent" if it occurs in a description.

`‣ UnivariatePolynomial` ( ring, cofs[, ind] ) | ( operation ) |

constructs an univariate polynomial over the ring `ring` in the indeterminate `ind` with the coefficients given by `coefs`.

`‣ UnivariatePolynomialByCoefficients` ( fam, cofs, ind ) | ( operation ) |

constructs an univariate polynomial over the coefficients family `fam` and in the indeterminate `ind` with the coefficients given by `coefs`. This function should be used in algorithms to create polynomials as it avoids overhead associated with `UnivariatePolynomial`

(66.5-1).

`‣ DegreeOfLaurentPolynomial` ( pol ) | ( attribute ) |

The degree of a univariate (Laurent) polynomial `pol` is the largest exponent n of a monomial x^n of `pol`. The degree of a zero polynomial is defined to be `-infinity`

.

gap> p:=UnivariatePolynomial(Rationals,[1,2,3,4],1); 4*x^3+3*x^2+2*x+1 gap> UnivariatePolynomialByCoefficients(FamilyObj(1),[9,2,3,4],73); 4*x_73^3+3*x_73^2+2*x_73+9 gap> CoefficientsOfUnivariatePolynomial(p); [ 1, 2, 3, 4 ] gap> DegreeOfLaurentPolynomial(p); 3 gap> DegreeOfLaurentPolynomial(Zero(p)); -infinity gap> IndeterminateNumberOfLaurentPolynomial(p); 1 gap> IndeterminateOfLaurentPolynomial(p); x

`‣ RootsOfPolynomial` ( [R, ]p ) | ( function ) |

For a univariate polynomial `p`, this function returns all roots of `p` over the ring `R`. If the ring is not specified, it defaults to the ring specified by the coefficients of `p` via `DefaultRing`

(56.1-3)).

gap> x:=X(Rationals,"x");;p:=x^4-1; x^4-1 gap> RootsOfPolynomial(p); [ 1, -1 ] gap> RootsOfPolynomial(CF(4),p); [ 1, -1, E(4), -E(4) ]

`‣ RootsOfUPol` ( [field, ]upol ) | ( function ) |

This function returns a list of all roots of the univariate polynomial `upol` in its default domain. If the optional argument `field` is a field then the roots in this field are computed. If `field` is the string `"split"`

then the splitting field of the polynomial is taken.

gap> RootsOfUPol(50-45*x-6*x^2+x^3); [ 10, 1, -5 ]

`‣ QuotRemLaurpols` ( left, right, mode ) | ( function ) |

This internal function for euclidean division of polynomials takes two polynomials `left` and `right` and computes their quotient. No test is performed whether the arguments indeed are polynomials. Depending on the integer variable `mode`, which may take values in a range from 1 to 4, it returns respectively:

the quotient (there might be some remainder),

the remainder,

a list

`[`

of quotient and remainder,`q`,`r`]the quotient if there is no remainder and

`fail`

otherwise.

`‣ UnivariatenessTestRationalFunction` ( f ) | ( function ) |

takes a rational function `f` and tests whether it is univariate rational function (or even a Laurent polynomial). It returns a list `[isunivariate, indet, islaurent, cofs]`

.

If `f` is a univariate rational function then `isunivariate`

is `true`

and `indet`

is the number of the appropriate indeterminate.

Furthermore, if `f` is a Laurent polynomial, then `islaurent`

is also `true`

. In this case the fourth entry, `cofs`

, is the value of the attribute `CoefficientsOfLaurentPolynomial`

(66.13-2) for `f`.

If `isunivariate`

is `true`

but `islaurent`

is `false`

, then `cofs`

is the value of the attribute `CoefficientsOfUnivariateRationalFunction`

(66.4-7) for `f`.

Otherwise, each entry of the returned list is equal to `fail`

. As there is no proper multivariate gcd, this may also happen for the rational function which may be reduced to univariate (see example).

gap> UnivariatenessTestRationalFunction( 50-45*x-6*x^2+x^3 ); [ true, 1, true, [ [ 50, -45, -6, 1 ], 0 ] ] gap> UnivariatenessTestRationalFunction( (-6*y^2+y^3) / (y+1) ); [ true, 2, false, [ [ -6, 1 ], [ 1, 1 ], 2 ] ] gap> UnivariatenessTestRationalFunction( (-6*y^2+y^3) / (x+1)); [ false, fail, false, fail ] gap> UnivariatenessTestRationalFunction( ((y+2)*(x+1)) / ((y-1)*(x+1)) ); [ fail, fail, fail, fail ]

`‣ InfoPoly` | ( info class ) |

is the info class for univariate polynomials.

We remark that some functions for multivariate polynomials (which will be defined in the following sections) permit a different syntax for univariate polynomials which drops the requirement to specify the indeterminate. Examples are `Value`

(66.7-1), `Discriminant`

(66.6-6), `Derivative`

(66.6-5), `LeadingCoefficient`

(66.6-3) and `LeadingMonomial`

(66.6-4):

gap> p:=UnivariatePolynomial(Rationals,[1,2,3,4],1); 4*x^3+3*x^2+2*x+1 gap> Value(p,Z(5)); Z(5)^2 gap> LeadingCoefficient(p); 4 gap> Derivative(p); 12*x^2+6*x+2

`‣ DegreeIndeterminate` ( pol, ind ) | ( operation ) |

returns the degree of the polynomial `pol` in the indeterminate (or indeterminate number) `ind`.

gap> f:=x^5+3*x*y+9*y^7+4*y^5*x+3*y+2; 9*y^7+4*x*y^5+x^5+3*x*y+3*y+2 gap> DegreeIndeterminate(f,1); 5 gap> DegreeIndeterminate(f,y); 7

`‣ PolynomialCoefficientsOfPolynomial` ( pol, ind ) | ( operation ) |

`PolynomialCoefficientsOfPolynomial`

returns the coefficient list (whose entries are polynomials not involving the indeterminate `ind`) describing the polynomial `pol` viewed as a polynomial in `ind`. Instead of the indeterminate, `ind` can also be an indeterminate number.

gap> PolynomialCoefficientsOfPolynomial(f,2); [ x^5+2, 3*x+3, 0, 0, 0, 4*x, 0, 9 ]

`‣ LeadingCoefficient` ( pol ) | ( operation ) |

returns the leading coefficient (that is the coefficient of the leading monomial, see?`LeadingMonomial`

(66.6-4)) of the polynomial `pol`.

`‣ LeadingMonomial` ( pol ) | ( operation ) |

returns the leading monomial (with respect to the ordering given by `MonomialExtGrlexLess`

(66.17-14)) of the polynomial `pol` as a list containing indeterminate numbers and exponents.

gap> LeadingCoefficient(f,1); 1 gap> LeadingCoefficient(f,2); 9 gap> LeadingMonomial(f); [ 2, 7 ] gap> LeadingCoefficient(f); 9

`‣ Derivative` ( ratfun[, ind] ) | ( attribute ) |

If `ratfun` is a univariate rational function then `Derivative`

returns the *derivative* of `ufun` by its indeterminate. For a rational function `ratfun`, the derivative by the indeterminate `ind` is returned, regarding `ratfun` as univariate in `ind`. Instead of the desired indeterminate, also the number of this indeterminate can be given as `ind`.

gap> Derivative(f,2); 63*y^6+20*x*y^4+3*x+3

`‣ Discriminant` ( pol[, ind] ) | ( operation ) |

If `pol` is a univariate polynomial then `Discriminant`

returns the *discriminant* of `pol` by its indeterminate. The two-argument form returns the discriminant of a polynomial `pol` by the indeterminate number `ind`, regarding `pol` as univariate in this indeterminate. Instead of the indeterminate number, the indeterminate itself can also be given as `ind`.

gap> Discriminant(f,1); 20503125*y^28+262144*y^25+27337500*y^22+19208040*y^21+1474560*y^17+136\ 68750*y^16+18225000*y^15+6075000*y^14+1105920*y^13+3037500*y^10+648972\ 0*y^9+4050000*y^8+900000*y^7+62208*y^5+253125*y^4+675000*y^3+675000*y^\ 2+300000*y+50000 gap> Discriminant(f,1) = Discriminant(f,x); true

`‣ Resultant` ( pol1, pol2, ind ) | ( operation ) |

computes the resultant of the polynomials `pol1` and `pol2` with respect to the indeterminate `ind`, or indeterminate number `ind`. The resultant considers `pol1` and `pol2` as univariate in `ind` and returns an element of the corresponding base ring (which might be a polynomial ring).

gap> Resultant(x^4+y,y^4+x,1); y^16+y gap> Resultant(x^4+y,y^4+x,2); x^16+x

`‣ Value` ( ratfun, indets, vals[, one] ) | ( operation ) |

`‣ Value` ( upol, value[, one] ) | ( operation ) |

The first variant takes a rational function `ratfun` and specializes the indeterminates given in `indets` to the values given in `vals`, replacing the i-th entry in `indets` by the i-th entry in `vals`. If this specialization results in a constant polynomial, an element of the coefficient ring is returned. If the specialization would specialize the denominator of `ratfun` to zero, an error is raised.

A variation is the evaluation at elements of another ring R, for which a multiplication with elements of the coefficient ring of `ratfun` are defined. In this situation the identity element of R may be given by a further argument `one` which will be used for x^0 for any specialized indeterminate x.

The second version takes an univariate rational function and specializes the value of its indeterminate to `val`. Again, an optional argument `one` may be given.

gap> Value(x*y+y+x^7,[x,y],[5,7]); 78167

Note that the default values for `one` can lead to different results than one would expect: For example for a matrix M, the values M+M^0 and M+1 are *different*. As `Value`

defaults to the one of the coefficient ring, when evaluating matrices in polynomials always the correct `one` should be given!

`‣ MinimalPolynomial` ( R, elm[, ind] ) | ( operation ) |

returns the *minimal polynomial* of `elm` over the ring `R`, expressed in the indeterminate number `ind`. If `ind` is not given, it defaults to 1.

The minimal polynomial is the monic polynomial of smallest degree with coefficients in `R` that has value zero at `elm`.

gap> MinimalPolynomial(Rationals,[[2,0],[0,2]]); x-2

`‣ CyclotomicPolynomial` ( F, n ) | ( function ) |

is the `n`-th cyclotomic polynomial over the ring `F`.

gap> CyclotomicPolynomial(Rationals,5); x^4+x^3+x^2+x+1

At the moment **GAP** provides only methods to factorize polynomials over finite fields (see Chapter?59), over subfields of cyclotomic fields (see Chapter?60), and over algebraic extensions of these (see Chapter?67).

`‣ Factors` ( [R, ]poly[, opt] ) | ( method ) |

returns a list of the irreducible factors of the polynomial `poly` in the polynomial ring `R`. (That is factors over the `CoefficientsRing`

(66.15-3) value of `R`.)

For univariate factorizations, it is possible to pass a record `opt` as a third argument. This record can contain the following components:

`onlydegs`

is a set of positive integers. The factorization assumes that all irreducible factors have a degree in this set.

`stopdegs`

is a set of positive integers. The factorization will stop once a factor of degree in

`stopdegs`

has been found and will return the factorization found so far.

gap> f:= CyclotomicPolynomial( GF(2), 7 ); x_1^6+x_1^5+x_1^4+x_1^3+x_1^2+x_1+Z(2)^0 gap> Factors( f ); [ x_1^3+x_1+Z(2)^0, x_1^3+x_1^2+Z(2)^0 ] gap> Factors( PolynomialRing( GF(8) ), f ); [ x_1+Z(2^3), x_1+Z(2^3)^2, x_1+Z(2^3)^3, x_1+Z(2^3)^4, x_1+Z(2^3)^5, x_1+Z(2^3)^6 ] gap> f:= MinimalPolynomial( Rationals, E(4) ); x^2+1 gap> Factors( f ); [ x^2+1 ] gap> Factors( PolynomialRing( Rationals ), f ); [ x^2+1 ] gap> Factors( PolynomialRing( CF(4) ), f ); [ x+(-E(4)), x+E(4) ]

`‣ FactorsSquarefree` ( pring, upol, opt ) | ( operation ) |

returns a factorization of the squarefree, monic, univariate polynomial `upol` in the polynomial ring `pring`; `opt` must be a (possibly empty) record of options. `upol` must not have zero as a root. This function is used by the factoring algorithms.

The current method for multivariate factorization reduces to univariate factorization by use of a reduction homomorphism of the form f(x_1,x_2,x_3) ? f(x,x^p,x^{p^2}). It can be very time intensive for larger degrees.

gap> Factors(x^10-y^10); [ x-y, x+y, x^4-x^3*y+x^2*y^2-x*y^3+y^4, x^4+x^3*y+x^2*y^2+x*y^3+y^4 ]

The following functions are only available to polynomials with rational coefficients:

`‣ PrimitivePolynomial` ( f ) | ( operation ) |

takes a polynomial `f` with rational coefficients and computes a new polynomial with integral coefficients, obtained by multiplying with the Lcm of the denominators of the coefficients and casting out the content (the Gcd of the coefficients). The operation returns a list [`newpol`,`coeff`] with rational `coeff` such that

.`coeff`*`newpol`=`f`

`‣ PolynomialModP` ( pol, p ) | ( function ) |

for a rational polynomial `pol` this function returns a polynomial over the field with `p` elements, obtained by reducing the coefficients modulo `p`.

`‣ GaloisType` ( f ) | ( attribute ) |

Let `f` be an irreducible polynomial with rational coefficients. This function returns the type of Gal(`f`) (considered as a transitive permutation group of the roots of `f`). It returns a number `i` if Gal(`f`) is permutation isomorphic to `TransitiveGroup(`

where `n`,`i`)`n` is the degree of `f`.

Identification is performed by factoring appropriate Galois resolvents as proposed in [SM85]. This function is provided for rational polynomials of degree up to 15. However, in some cases the required calculations become unfeasibly large.

For a few polynomials of degree 14, a complete discrimination is not yet possible, as it would require computations, that are not feasible with current factoring methods.

This function requires the transitive groups library to be installed (see transgrp: Transitive Permutation Groups).

`‣ ProbabilityShapes` ( f ) | ( function ) |

Let `f` be an irreducible polynomial with rational coefficients. This function returns a list of the most likely type(s) of Gal(`f`) (see `GaloisType`

(66.11-3)), based on factorization modulo a set of primes. It is very fast, but the result is only probabilistic.

This function requires the transitive groups library to be installed (see transgrp: Transitive Permutation Groups).

gap> f:=x^9-9*x^7+27*x^5-39*x^3+36*x-8;; gap> GaloisType(f); 25 gap> TransitiveGroup(9,25); [1/2.S(3)^3]3 gap> ProbabilityShapes(f); [ 25 ]

The following operations are used by **GAP** inside the factorization algorithm but might be of interest also in other contexts.

`‣ BombieriNorm` ( pol ) | ( function ) |

computes weighted Norm [`pol`]_2 of `pol` which is a good measure for factor coefficients (see [BTW93]).

`‣ MinimizedBombieriNorm` ( f ) | ( attribute ) |

This function applies linear Tschirnhaus transformations (x ? x + i) to the polynomial `f`, trying to get the Bombieri norm of `f` small. It returns a list `[`

.`new_polynomial`, `i_of_transformation`]

`‣ HenselBound` ( pol[, minpol, den] ) | ( function ) |

returns the Hensel bound of the polynomial `pol`. If the computation takes place over an algebraic extension, then the minimal polynomial `minpol` and denominator `den` must be given.

`‣ OneFactorBound` ( pol ) | ( function ) |

returns the coefficient bound for a single factor of the rational polynomial `pol`.

A univariate polynomial can be written in the form r_0 + r_1 x + ? + r_n x^n, with r_i ∈ R. Formally, there is no reason to start with 0, if m is an integer, we can consider objects of the form r_m x^m + r_{m+1} x^{m+1} + ? + r_n x^n. We call these *Laurent polynomials*. Laurent polynomials also can be considered as quotients of a univariate polynomial by a power of the indeterminate. The addition and multiplication of univariate polynomials extends to Laurent polynomials (though it might be impossible to interpret a Laurent polynomial as a function) and many functions for univariate polynomials extend to Laurent polynomials (or extended versions for Laurent polynomials exist).

`‣ LaurentPolynomialByCoefficients` ( fam, cofs, val[, ind] ) | ( operation ) |

constructs a Laurent polynomial over the coefficients family `fam` and in the indeterminate `ind` (defaulting to 1) with the coefficients given by `coefs` and valuation `val`.

`‣ CoefficientsOfLaurentPolynomial` ( laurent ) | ( attribute ) |

For a Laurent polynomial `laurent`, this function returns a pair `[`

, consisting of the coefficient list (in ascending order) `cof`, `val`]`cof` and the valuation `val` of `laurent`.

gap> p:=LaurentPolynomialByCoefficients(FamilyObj(1), > [1,2,3,4,5],-2); 5*x^2+4*x+3+2*x^-1+x^-2 gap> NumeratorOfRationalFunction(p);DenominatorOfRationalFunction(p); 5*x^4+4*x^3+3*x^2+2*x+1 x^2 gap> CoefficientsOfLaurentPolynomial(p*p); [ [ 1, 4, 10, 20, 35, 44, 46, 40, 25 ], -4 ]

`‣ IndeterminateNumberOfLaurentPolynomial` ( pol ) | ( attribute ) |

Is a synonym for `IndeterminateNumberOfUnivariateRationalFunction`

(66.1-2).

`‣ UnivariateRationalFunctionByCoefficients` ( fam, ncof, dcof, val[, ind] ) | ( operation ) |

constructs a univariate rational function over the coefficients family `fam` and in the indeterminate `ind` (defaulting to 1) with numerator and denominator coefficients given by `ncof` and `dcof` and valuation `val`.

While polynomials depend only on the family of the coefficients, polynomial rings A are defined over a base ring R. A polynomial is an element of A if and only if all its coefficients are contained in R. Besides providing domains and an easy way to create polynomials, polynomial rings can affect the behavior of operations like factorization into irreducibles.

If you need to work with a polynomial ring and its indeterminates the following two approaches will produce a ring that contains given variables (see section?66.1 for details about the internal numbering): Either, first create the ring and then get the indeterminates with `IndeterminatesOfPolynomialRing`

(66.15-2).

gap> r := PolynomialRing(Rationals,["a","b"]);; gap> indets := IndeterminatesOfPolynomialRing(r);; gap> a := indets[1]; a := indets[2]; a b

Alternatively, first create the indeterminates and then create the ring including these indeterminates.

gap> a:=Indeterminate(Rationals,"a":old);; gap> b:=Indeterminate(Rationals,"b":old);; gap> PolynomialRing(Rationals,[a,b]);;

As a convenient shortcut, intended mainly for interactive working, the i-th indeterminate of a polynomial ring R can be accessed as R.i, which corresponds exactly to `IndeterminatesOfPolynomialRing`

( R )[i] or, if it has the name `nam`

, as R`.nam`

. *Note* that the number i is in general *not* the indeterminate number, but simply an index into the indeterminates list of R.

gap> r := PolynomialRing(Rationals, ["a", "b"]:old );; gap> r.1; r.2; r.a; r.b; a b a b gap> IndeterminateNumberOfLaurentPolynomial(r.1); 3

Polynomials as **GAP** objects can exist without a polynomial ring being defined and polynomials cannot be associated to a particular polynomial ring. (For example dividing a polynomial which is in a polynomial ring over the integers by another integer will result in a polynomial over the rationals, not in a rational function over the integers.)

`‣ PolynomialRing` ( R, rank[, avoid] ) | ( operation ) |

`‣ PolynomialRing` ( R, names[, avoid] ) | ( operation ) |

`‣ PolynomialRing` ( R, indets ) | ( operation ) |

`‣ PolynomialRing` ( R, indetnums ) | ( operation ) |

creates a polynomial ring over the ring `R`. If a positive integer `rank` is given, this creates the polynomial ring in `rank` indeterminates. These indeterminates will have the internal index numbers 1 to `rank`. The second usage takes a list `names` of strings and returns a polynomial ring in indeterminates labelled by `names`. These indeterminates have "new" internal index numbers as if they had been created by calls to `Indeterminate`

(66.1-1). (If the argument `avoid` is given it contains indeterminates that should be avoided, in this case internal index numbers are incremented to skip these variables.) In the third version, a list of indeterminates `indets` is given. This creates the polynomial ring in the indeterminates `indets`. Finally, the fourth version specifies indeterminates by their index numbers.

To get the indeterminates of a polynomial ring use `IndeterminatesOfPolynomialRing`

(66.15-2). (Indeterminates created independently with `Indeterminate`

(66.1-1) will usually differ, though they might be given the same name and display identically, see Section?66.1.)

`‣ IndeterminatesOfPolynomialRing` ( pring ) | ( attribute ) |

`‣ IndeterminatesOfFunctionField` ( ffield ) | ( attribute ) |

returns a list of the indeterminates of the polynomial ring `pring`, respectively the function field `ffield`.

`‣ CoefficientsRing` ( pring ) | ( attribute ) |

returns the ring of coefficients of the polynomial ring `pring`, that is the ring over which `pring` was defined.

gap> r:=PolynomialRing(GF(7)); GF(7)[x_1] gap> r:=PolynomialRing(GF(7),3); GF(7)[x_1,x_2,x_3] gap> IndeterminatesOfPolynomialRing(r); [ x_1, x_2, x_3 ] gap> r2:=PolynomialRing(GF(7),[5,7,12]); GF(7)[x_5,x_7,x_12] gap> CoefficientsRing(r); GF(7) gap> r:=PolynomialRing(GF(7),3); GF(7)[x_1,x_2,x_3] gap> r2:=PolynomialRing(GF(7),3,IndeterminatesOfPolynomialRing(r)); GF(7)[x_4,x_5,x_6] gap> r:=PolynomialRing(GF(7),["x","y","z","z2"]); GF(7)[x,y,z,z2]

`‣ IsPolynomialRing` ( pring ) | ( category ) |

is the category of polynomial rings

`‣ IsFiniteFieldPolynomialRing` ( pring ) | ( category ) |

is the category of polynomial rings over a finite field (see Chapter?59).

`‣ IsAbelianNumberFieldPolynomialRing` ( pring ) | ( category ) |

is the category of polynomial rings over a field of cyclotomics (see the chapters?18 and 60).

`‣ IsRationalsPolynomialRing` ( pring ) | ( category ) |

is the category of polynomial rings over the rationals (see Chapter?17).

gap> r := PolynomialRing(Rationals, ["a", "b"] );; gap> IsPolynomialRing(r); true gap> IsFiniteFieldPolynomialRing(r); false gap> IsRationalsPolynomialRing(r); true

`‣ FunctionField` ( R, rank[, avoid] ) | ( operation ) |

`‣ FunctionField` ( R, names[, avoid] ) | ( operation ) |

`‣ FunctionField` ( R, indets ) | ( operation ) |

`‣ FunctionField` ( R, indetnums ) | ( operation ) |

creates a function field over the integral ring `R`. If a positive integer `rank` is given, this creates the function field in `rank` indeterminates. These indeterminates will have the internal index numbers 1 to `rank`. The second usage takes a list `names` of strings and returns a function field in indeterminates labelled by `names`. These indeterminates have "new" internal index numbers as if they had been created by calls to `Indeterminate`

(66.1-1). (If the argument `avoid` is given it contains indeterminates that should be avoided, in this case internal index numbers are incremented to skip these variables.) In the third version, a list of indeterminates `indets` is given. This creates the function field in the indeterminates `indets`. Finally, the fourth version specifies indeterminates by their index number.

To get the indeterminates of a function field use `IndeterminatesOfFunctionField`

(66.15-2). (Indeterminates created independently with `Indeterminate`

(66.1-1) will usually differ, though they might be given the same name and display identically, see Section?66.1.)

`‣ IsFunctionField` ( ffield ) | ( category ) |

is the category of function fields

`‣ UnivariatePolynomialRing` ( R[, nr] ) | ( operation ) |

`‣ UnivariatePolynomialRing` ( R[, name][, avoid] ) | ( operation ) |

returns a univariate polynomial ring in the indeterminate `nr` over the base ring `R`. If `nr` is not given it defaults to 1.

If the number is not specified a list `avoid` of indeterminates may be given. Then the function will return a ring in an indeterminate that is guaranteed to be different from all the indeterminates in `avoid`.

Also a string `name` can be prescribed as the name of the indeterminate chosen (also avoiding the indeterminates in the list `avoid` if given).

`‣ IsUnivariatePolynomialRing` ( pring ) | ( category ) |

is the category of polynomial rings with one indeterminate.

gap> r:=UnivariatePolynomialRing(Rationals,"p"); Rationals[p] gap> r2:=PolynomialRing(Rationals,["q"]); Rationals[q] gap> IsUnivariatePolynomialRing(r); true gap> IsUnivariatePolynomialRing(r2); true

It is often desirable to consider the monomials within a polynomial to be arranged with respect to a certain ordering. Such an ordering is called a *monomial ordering* if it is total, invariant under multiplication with other monomials and admits no infinite descending chains. For details on monomial orderings see [CLO97].

In **GAP**, monomial orderings are represented by objects that provide a way to compare monomials (as polynomials as well as –for efficiency purposes within algorithms– in the internal representation as lists).

Normally the ordering chosen should be *admissible*, i.e. it must be compatible with products: If a < b then ca < cb for all monomials a, b and c.

Each monomial ordering provides the two functions `MonomialComparisonFunction`

(66.17-5) and `MonomialExtrepComparisonFun`

(66.17-6) to compare monomials. These functions work as "is less than", i.e. they return `true`

if and only if the left argument is smaller.

`‣ IsMonomialOrdering` ( obj ) | ( category ) |

A monomial ordering is an object representing a monomial ordering. Its attributes `MonomialComparisonFunction`

(66.17-5) and `MonomialExtrepComparisonFun`

(66.17-6) are actual comparison functions.

`‣ LeadingMonomialOfPolynomial` ( pol, ord ) | ( operation ) |

returns the leading monomial (with respect to the ordering `ord`) of the polynomial `pol`.

gap> x:=Indeterminate(Rationals,"x");; gap> y:=Indeterminate(Rationals,"y");; gap> z:=Indeterminate(Rationals,"z");; gap> lexord:=MonomialLexOrdering();grlexord:=MonomialGrlexOrdering(); MonomialLexOrdering() MonomialGrlexOrdering() gap> f:=2*x+3*y+4*z+5*x^2-6*z^2+7*y^3; 7*y^3+5*x^2-6*z^2+2*x+3*y+4*z gap> LeadingMonomialOfPolynomial(f,lexord); x^2 gap> LeadingMonomialOfPolynomial(f,grlexord); y^3

`‣ LeadingTermOfPolynomial` ( pol, ord ) | ( operation ) |

returns the leading term (with respect to the ordering `ord`) of the polynomial `pol`, i.e. the product of leading coefficient and leading monomial.

`‣ LeadingCoefficientOfPolynomial` ( pol, ord ) | ( operation ) |

returns the leading coefficient (that is the coefficient of the leading monomial, see?`LeadingMonomialOfPolynomial`

(66.17-2)) of the polynomial `pol`.

gap> LeadingTermOfPolynomial(f,lexord); 5*x^2 gap> LeadingTermOfPolynomial(f,grlexord); 7*y^3 gap> LeadingCoefficientOfPolynomial(f,lexord); 5

`‣ MonomialComparisonFunction` ( O ) | ( attribute ) |

If `O` is an object representing a monomial ordering, this attribute returns a *function* that can be used to compare or sort monomials (and polynomials which will be compared by their monomials in decreasing order) in this order.

gap> MonomialComparisonFunction(lexord); function( a, b ) ... end gap> l:=[f,Derivative(f,x),Derivative(f,y),Derivative(f,z)];; gap> Sort(l,MonomialComparisonFunction(lexord));l; [ -12*z+4, 21*y^2+3, 10*x+2, 7*y^3+5*x^2-6*z^2+2*x+3*y+4*z ]

`‣ MonomialExtrepComparisonFun` ( O ) | ( attribute ) |

If `O` is an object representing a monomial ordering, this attribute returns a *function* that can be used to compare or sort monomials *in their external representation* (as lists). This comparison variant is used inside algorithms that manipulate the external representation.

`‣ MonomialLexOrdering` ( [vari] ) | ( function ) |

This function creates a lexicographic ordering for monomials. Monomials are compared first by the exponents of the largest variable, then the exponents of the second largest variable and so on.

The variables are ordered according to their (internal) index, i.e., x_1 is larger than x_2 and so on. If `vari` is given, and is a list of variables or variable indices, instead this arrangement of variables (in descending order; i.e. the first variable is larger than the second) is used as the underlying order of variables.

gap> l:=List(Tuples([1..3],3),i->x^(i[1]-1)*y^(i[2]-1)*z^(i[3]-1)); [ 1, z, z^2, y, y*z, y*z^2, y^2, y^2*z, y^2*z^2, x, x*z, x*z^2, x*y, x*y*z, x*y*z^2, x*y^2, x*y^2*z, x*y^2*z^2, x^2, x^2*z, x^2*z^2, x^2*y, x^2*y*z, x^2*y*z^2, x^2*y^2, x^2*y^2*z, x^2*y^2*z^2 ] gap> Sort(l,MonomialComparisonFunction(MonomialLexOrdering()));l; [ 1, z, z^2, y, y*z, y*z^2, y^2, y^2*z, y^2*z^2, x, x*z, x*z^2, x*y, x*y*z, x*y*z^2, x*y^2, x*y^2*z, x*y^2*z^2, x^2, x^2*z, x^2*z^2, x^2*y, x^2*y*z, x^2*y*z^2, x^2*y^2, x^2*y^2*z, x^2*y^2*z^2 ] gap> Sort(l,MonomialComparisonFunction(MonomialLexOrdering([y,z,x])));l; [ 1, x, x^2, z, x*z, x^2*z, z^2, x*z^2, x^2*z^2, y, x*y, x^2*y, y*z, x*y*z, x^2*y*z, y*z^2, x*y*z^2, x^2*y*z^2, y^2, x*y^2, x^2*y^2, y^2*z, x*y^2*z, x^2*y^2*z, y^2*z^2, x*y^2*z^2, x^2*y^2*z^2 ] gap> Sort(l,MonomialComparisonFunction(MonomialLexOrdering([z,x,y])));l; [ 1, y, y^2, x, x*y, x*y^2, x^2, x^2*y, x^2*y^2, z, y*z, y^2*z, x*z, x*y*z, x*y^2*z, x^2*z, x^2*y*z, x^2*y^2*z, z^2, y*z^2, y^2*z^2, x*z^2, x*y*z^2, x*y^2*z^2, x^2*z^2, x^2*y*z^2, x^2*y^2*z^2 ]

`‣ MonomialGrlexOrdering` ( [vari] ) | ( function ) |

This function creates a degree/lexicographic ordering. In this ordering monomials are compared first by their total degree, then lexicographically (see `MonomialLexOrdering`

(66.17-7)).

The variables are ordered according to their (internal) index, i.e., x_1 is larger than x_2 and so on. If `vari` is given, and is a list of variables or variable indices, instead this arrangement of variables (in descending order; i.e. the first variable is larger than the second) is used as the underlying order of variables.

`‣ MonomialGrevlexOrdering` ( [vari] ) | ( function ) |

This function creates a "grevlex" ordering. In this ordering monomials are compared first by total degree and then backwards lexicographically. (This is different than "grlex" ordering with variables reversed.)

The variables are ordered according to their (internal) index, i.e., x_1 is larger than x_2 and so on. If `vari` is given, and is a list of variables or variable indices, instead this arrangement of variables (in descending order; i.e. the first variable is larger than the second) is used as the underlying order of variables.

gap> Sort(l,MonomialComparisonFunction(MonomialGrlexOrdering()));l; [ 1, z, y, x, z^2, y*z, y^2, x*z, x*y, x^2, y*z^2, y^2*z, x*z^2, x*y*z, x*y^2, x^2*z, x^2*y, y^2*z^2, x*y*z^2, x*y^2*z, x^2*z^2, x^2*y*z, x^2*y^2, x*y^2*z^2, x^2*y*z^2, x^2*y^2*z, x^2*y^2*z^2 ] gap> Sort(l,MonomialComparisonFunction(MonomialGrevlexOrdering()));l; [ 1, z, y, x, z^2, y*z, x*z, y^2, x*y, x^2, y*z^2, x*z^2, y^2*z, x*y*z, x^2*z, x*y^2, x^2*y, y^2*z^2, x*y*z^2, x^2*z^2, x*y^2*z, x^2*y*z, x^2*y^2, x*y^2*z^2, x^2*y*z^2, x^2*y^2*z, x^2*y^2*z^2 ] gap> Sort(l,MonomialComparisonFunction(MonomialGrlexOrdering([z,y,x])));l; [ 1, x, y, z, x^2, x*y, y^2, x*z, y*z, z^2, x^2*y, x*y^2, x^2*z, x*y*z, y^2*z, x*z^2, y*z^2, x^2*y^2, x^2*y*z, x*y^2*z, x^2*z^2, x*y*z^2, y^2*z^2, x^2*y^2*z, x^2*y*z^2, x*y^2*z^2, x^2*y^2*z^2 ]

`‣ EliminationOrdering` ( elim[, rest] ) | ( function ) |

This function creates an elimination ordering for eliminating the variables in `elim`. Two monomials are compared first by the exponent vectors for the variables listed in `elim` (a lexicographic comparison with respect to the ordering indicated in `elim`). If these submonomial are equal, the submonomials given by the other variables are compared by a graded lexicographic ordering (with respect to the variable order given in `rest`, if called with two parameters).

Both `elim` and `rest` may be a list of variables or a list of variable indices.

`‣ PolynomialReduction` ( poly, gens, order ) | ( function ) |

reduces the polynomial `poly` by the ideal generated by the polynomials in `gens`, using the order `order` of monomials. Unless `gens` is a Gr?bner basis the result is not guaranteed to be unique.

The operation returns a list of length two, the first entry is the remainder after the reduction. The second entry is a list of quotients corresponding to `gens`.

Note that the strategy used by `PolynomialReduction`

differs from the standard textbook reduction algorithm, which is provided by `PolynomialDivisionAlgorithm`

(66.17-13).

`‣ PolynomialReducedRemainder` ( poly, gens, order ) | ( function ) |

this operation does the same way as `PolynomialReduction`

(66.17-11) but does not keep track of the actual quotients and returns only the remainder (it is therefore slightly faster).

`‣ PolynomialDivisionAlgorithm` ( poly, gens, order ) | ( function ) |

This function implements the division algorithm for multivariate polynomials as given in [CLO97, Theorem 3 in Chapter 2]. (It might be slower than `PolynomialReduction`

(66.17-11) but the remainders are guaranteed to agree with the textbook.)

The operation returns a list of length two, the first entry is the remainder after the reduction. The second entry is a list of quotients corresponding to `gens`.

gap> bas:=[x^3*y*z,x*y^2*z,z*y*z^3+x];; gap> pol:=x^7*z*bas[1]+y^5*bas[3]+x*z;; gap> PolynomialReduction(pol,bas,MonomialLexOrdering()); [ -y*z^5, [ x^7*z, 0, y^5+z ] ] gap> PolynomialReducedRemainder(pol,bas,MonomialLexOrdering()); -y*z^5 gap> PolynomialDivisionAlgorithm(pol,bas,MonomialLexOrdering()); [ -y*z^5, [ x^7*z, 0, y^5+z ] ]

`‣ MonomialExtGrlexLess` ( a, b ) | ( function ) |

implements comparison of monomial in their external representation by a "grlex" order with x_1>x_2 (This is exactly the same as the ordering by `MonomialGrlexOrdering`

(66.17-8), see? 66.17). The function takes two monomials `a` and `b` in expanded form and returns whether the first is smaller than the second. (This ordering is also used by **GAP** internally for representing polynomials as a linear combination of monomials.)

See section?66.21 for details on the expanded form of monomials.

A *Groebner Basis* of an ideal Ii, in a polynomial ring R, with respect to a monomial ordering, is a set of ideal generators `G` such that the ideal generated by the leading monomials of all polynomials in `G` is equal to the ideal generated by the leading monomials of all polynomials in `I`.

For more details on Groebner bases see [CLO97].

`‣ GroebnerBasis` ( L, O ) | ( operation ) |

`‣ GroebnerBasis` ( I, O ) | ( operation ) |

`‣ GroebnerBasisNC` ( L, O ) | ( function ) |

Let `O` be a monomial ordering and `L` be a list of polynomials that generate an ideal `I`. This operation returns a Groebner basis of `I` with respect to the ordering `O`.

`GroebnerBasisNC`

works like `GroebnerBasis`

with the only distinction that the first argument has to be a list of polynomials and that no test is performed to check whether the ordering is defined for all occuring variables.

Note that **GAP** at the moment only includes a na?ve implementation of Buchberger's algorithm (which is mainly intended as a teaching tool). It might not be sufficient for serious problems.

gap> l:=[x^2+y^2+z^2-1,x^2+z^2-y,x-y];; gap> GroebnerBasis(l,MonomialLexOrdering()); [ x^2+y^2+z^2-1, x^2+z^2-y, x-y, -y^2-y+1, -z^2+2*y-1, 1/2*z^4+2*z^2-1/2 ] gap> GroebnerBasis(l,MonomialLexOrdering([z,x,y])); [ x^2+y^2+z^2-1, x^2+z^2-y, x-y, -y^2-y+1 ] gap> GroebnerBasis(l,MonomialGrlexOrdering()); [ x^2+y^2+z^2-1, x^2+z^2-y, x-y, -y^2-y+1, -z^2+2*y-1 ]

`‣ ReducedGroebnerBasis` ( L, O ) | ( operation ) |

`‣ ReducedGroebnerBasis` ( I, O ) | ( operation ) |

a Groebner basis B (see?`GroebnerBasis`

(66.18-1)) is *reduced* if no monomial in a polynomial in `B` is divisible by the leading monomial of another polynomial in B. This operation computes a Groebner basis with respect to the monomial ordering `O` and then reduces it.

gap> ReducedGroebnerBasis(l,MonomialGrlexOrdering()); [ x-y, z^2-2*y+1, y^2+y-1 ] gap> ReducedGroebnerBasis(l,MonomialLexOrdering()); [ z^4+4*z^2-1, -1/2*z^2+y-1/2, -1/2*z^2+x-1/2 ] gap> ReducedGroebnerBasis(l,MonomialLexOrdering([y,z,x])); [ x^2+x-1, z^2-2*x+1, -x+y ]

For performance reasons it can be advantageous to define monomial orderings once and then to reuse them:

gap> ord:=MonomialGrlexOrdering();; gap> GroebnerBasis(l,ord); [ x^2+y^2+z^2-1, x^2+z^2-y, x-y, -y^2-y+1, -z^2+2*y-1 ] gap> ReducedGroebnerBasis(l,ord); [ x-y, z^2-2*y+1, y^2+y-1 ]

`‣ StoredGroebnerBasis` ( I ) | ( attribute ) |

For an ideal `I` in a polynomial ring, this attribute holds a list [ B, O ] where B is a Groebner basis for the monomial ordering O. this can be used to test membership or canonical coset representatives.

`‣ InfoGroebner` | ( info class ) |

This info class gives information about Groebner basis calculations.

All rational functions defined over a ring lie in the same family, the rational functions family over this ring.

In **GAP** therefore the family of a polynomial depends only on the family of the coefficients, all polynomials whose coefficients lie in the same family are "compatible".

`‣ RationalFunctionsFamily` ( fam ) | ( attribute ) |

creates a family containing rational functions with coefficients in `fam`. All elements of the `RationalFunctionsFamily`

are rational functions (see?`IsRationalFunction`

(66.4-1)).

`‣ IsPolynomialFunctionsFamily` ( obj ) | ( category ) |

`‣ IsRationalFunctionsFamily` ( obj ) | ( category ) |

`IsPolynomialFunctionsFamily`

is the category of a family of polynomials. For families over an UFD, the category becomes `IsRationalFunctionsFamily`

(as rational functions and quotients are only provided for families over an UFD.)

gap> fam:=RationalFunctionsFamily(FamilyObj(1)); NewFamily( "RationalFunctionsFamily(...)", [ 618, 620 ], [ 82, 85, 89, 93, 97, 100, 103, 107, 111, 618, 620 ] )

`‣ CoefficientsFamily` ( rffam ) | ( attribute ) |

If `rffam` has been created as `RationalFunctionsFamily(`

this attribute holds the coefficients family `cfam`)`cfam`.

**GAP** does *not* embed the base ring in the polynomial ring. While multiplication and addition of base ring elements to rational functions return the expected results, polynomials and rational functions are not equal.

gap> 1=Indeterminate(Rationals)^0; false

**GAP** uses four representations of rational functions: Rational functions given by numerator and denominator, polynomials, univariate rational functions (given by coefficient lists for numerator and denominator and valuation) and Laurent polynomials (given by coefficient list and valuation).

These representations do not necessarily reflect mathematical properties: While an object in the Laurent polynomials representation must be a Laurent polynomial it might turn out that a rational function given by numerator and denominator is actually a Laurent polynomial and the property tests in section?66.4 will find this out.

Each representation is associated one or several "defining attributes" that give an "external" representation (see?66.21) of the representation in the form of lists and are the defining information that tells a rational function what it is.

**GAP** also implements methods to compute these attributes for rational functions in *other* representations, provided it would be possible to express an *mathematically equal* rational function in the representation associated with the attribute. (That is one can always get a numerator/denominator representation of a polynomial while an arbitrary function of course can compute a polynomial representation only if it is a polynomial.)

Therefore these attributes can be thought of as "conceptual" representations that allow us –as far as possible– to consider an object as a rational function, a polynomial or a Laurent polynomial, regardless of the way it is represented in the computer.

Functions thus usually do not need to care about the representation of a rational function. Depending on its (known in the context or determined) properties, they can access the attribute representing the rational function in the desired way.

Consequentially, methods for rational functions are installed for properties and not for representations.

When *creating* new rational functions however they must be created in one of the three representations. In most cases this will be the representation for which the "conceptual" representation in which the calculation was done is the defining attribute.

Iterated operations (like forming the product over a list) therefore will tend to stay in the most suitable representation and the calculation of another conceptual representation (which may be comparatively expensive in certain circumstances) is not necessary.

In general, rational functions are given in terms of monomials. They are represented by lists, using numbers (see?66.1) for the indeterminates.

A monomial is a product of powers of indeterminates. A monomial is stored as a list (we call this the *expanded form* of the monomial) of the form `[`

where each `inum`,`exp`,`inum`,`exp`,...]`inum` is the number of an indeterminate and `exp` the corresponding exponent. The list must be sorted according to the numbers of the indeterminates. Thus for example, if x, y and z are the first three indeterminates, the expanded form of the monomial x^5 z^8 = z^8 x^5 is `[ 1, 5, 3, 8 ]`

. The representation of a polynomials is a list of the form `[`

where `mon`,`coeff`,`mon`,`coeff`,...]`mon` is a monomial in expanded form (that is given as list) and `coeff` its coefficient. The monomials must be sorted according to the total degree/lexicographic order (This is the same as given by the "grlex" monomial ordering, see?`MonomialGrlexOrdering`

(66.17-8)). We call this the *external representation* of a polynomial. (The reason for ordering is that addition of polynomials becomes linear in the number of monomials instead of quadratic; the reason for the particular ordering chose is that it is compatible with multiplication and thus gives acceptable performance for quotient calculations.)

The attributes that give a representation of a a rational function as a Laurent polynomial are `CoefficientsOfLaurentPolynomial`

(66.13-2) and `IndeterminateNumberOfUnivariateRationalFunction`

(66.1-2).

Algorithms should use only the attributes `ExtRepNumeratorRatFun`

(66.21-2), `ExtRepDenominatorRatFun`

(66.21-3), `ExtRepPolynomialRatFun`

(66.21-6), `CoefficientsOfLaurentPolynomial`

(66.13-2) and –if the univariate function is not constant– `IndeterminateNumberOfUnivariateRationalFunction`

(66.1-2) as the low-level interface to work with a polynomial. They should not refer to the actual representation used.

`‣ IsRationalFunctionDefaultRep` ( obj ) | ( representation ) |

is the default representation of rational functions. A rational function in this representation is defined by the attributes `ExtRepNumeratorRatFun`

(66.21-2) and `ExtRepDenominatorRatFun`

(66.21-3), the values of which are external representations of polynomials.

`‣ ExtRepNumeratorRatFun` ( ratfun ) | ( attribute ) |

returns the external representation of the numerator polynomial of the rational function `ratfun`. Numerator and denominator are not guaranteed to be cancelled against each other.

`‣ ExtRepDenominatorRatFun` ( ratfun ) | ( attribute ) |

returns the external representation of the denominator polynomial of the rational function `ratfun`. Numerator and denominator are not guaranteed to be cancelled against each other.

`‣ ZeroCoefficientRatFun` ( ratfun ) | ( operation ) |

returns the zero of the coefficient ring. This might be needed to represent the zero polynomial for which the external representation of the numerator is the empty list.

`‣ IsPolynomialDefaultRep` ( obj ) | ( representation ) |

is the default representation of polynomials. A polynomial in this representation is defined by the components and `ExtRepNumeratorRatFun`

(66.21-2) where `ExtRepNumeratorRatFun`

(66.21-2) is the external representation of the polynomial.

`‣ ExtRepPolynomialRatFun` ( polynomial ) | ( attribute ) |

returns the external representation of a polynomial. The difference to `ExtRepNumeratorRatFun`

(66.21-2) is that rational functions might know to be a polynomial but can still have a non-vanishing denominator. In this case `ExtRepPolynomialRatFun`

has to call a quotient routine.

`‣ IsLaurentPolynomialDefaultRep` ( obj ) | ( representation ) |

This representation is used for Laurent polynomials and univariate polynomials. It represents a Laurent polynomial via the attributes `CoefficientsOfLaurentPolynomial`

(66.13-2) and `IndeterminateNumberOfLaurentPolynomial`

(66.13-3).

The operations `LaurentPolynomialByCoefficients`

(66.13-1), `PolynomialByExtRep`

(66.22-2) and `RationalFunctionByExtRep`

(66.22-1) are used to construct objects in the three basic representations for rational functions.

`‣ RationalFunctionByExtRep` ( rfam, num, den ) | ( function ) |

`‣ RationalFunctionByExtRepNC` ( rfam, num, den ) | ( function ) |

constructs a rational function (in the representation `IsRationalFunctionDefaultRep`

(66.21-1)) in the rational function family `rfam`, the rational function itself is given by the external representations `num` and `den` for numerator and denominator. No cancellation takes place.

The variant `RationalFunctionByExtRepNC`

does not perform any test of the arguments and thus potentially can create illegal objects. It only should be used if speed is required and the arguments are known to be in correct form.

`‣ PolynomialByExtRep` ( rfam, extrep ) | ( function ) |

`‣ PolynomialByExtRepNC` ( rfam, extrep ) | ( function ) |

constructs a polynomial (in the representation `IsPolynomialDefaultRep`

(66.21-5)) in the rational function family `rfam`, the polynomial itself is given by the external representation `extrep`.

The variant `PolynomialByExtRepNC`

does not perform any test of the arguments and thus potentially can create invalid objects. It only should be used if speed is required and the arguments are known to be in correct form.

gap> fam:=RationalFunctionsFamily(FamilyObj(1));; gap> p:=PolynomialByExtRep(fam,[[1,2],1,[2,1,15,7],3]); 3*y*x_15^7+x^2 gap> q:=p/(p+1); (3*y*x_15^7+x^2)/(3*y*x_15^7+x^2+1) gap> ExtRepNumeratorRatFun(q); [ [ 1, 2 ], 1, [ 2, 1, 15, 7 ], 3 ] gap> ExtRepDenominatorRatFun(q); [ [ ], 1, [ 1, 2 ], 1, [ 2, 1, 15, 7 ], 3 ]

`‣ LaurentPolynomialByExtRep` ( fam, cofs, val, ind ) | ( function ) |

`‣ LaurentPolynomialByExtRepNC` ( fam, cofs, val, ind ) | ( function ) |

creates a Laurent polynomial in the family `fam` with [`cofs`,`val`] as value of `CoefficientsOfLaurentPolynomial`

(66.13-2). No coefficient shifting is performed. This is the lowest level function to create a Laurent polynomial but will rely on the coefficients being shifted properly and will not perform any tests. Unless this is guaranteed for the parameters, `LaurentPolynomialByCoefficients`

(66.13-1) should be used.

The following operations are used internally to perform the arithmetic for polynomials in their "external" representation (see?66.21) as lists.

Functions to perform arithmetic with the coefficient lists of Laurent polynomials are described in Section?23.4.

`‣ ZippedSum` ( z1, z2, czero, funcs ) | ( operation ) |

computes the sum of two external representations of polynomials `z1` and `z2`. `czero` is the appropriate coefficient zero and `funcs` a list [ `monomial_less`, `coefficient_sum` ] containing a monomial comparison and a coefficient addition function. This list can be found in the component `fam``!.zippedSum`

of the rational functions family.

Note that `coefficient_sum` must be a proper "summation" function, not a function computing differences.

`‣ ZippedProduct` ( z1, z2, czero, funcs ) | ( operation ) |

computes the product of two external representations of polynomials `z1` and `z2`. `czero` is the appropriate coefficient zero and `funcs` a list [ `monomial_prod`, `monomial_less`, `coefficient_sum`, `coefficient_prod`] containing functions to multiply and compare monomials, to add and to multiply coefficients. This list can be found in the component

of the rational functions family.`fam`!.zippedProduct

`‣ QuotientPolynomialsExtRep` ( fam, a, b ) | ( function ) |

Let `a` and `b` the external representations of two polynomials in the rational functions family `fam`. This function computes the external representation of the quotient of both polynomials, it returns `fail`

if the polynomial described by `b` does not divide the polynomial described by `a`.

The operation `Gcd`

(56.7-1) can be used to test for common factors of two polynomials. This however would be too expensive to be done in the arithmetic, thus uses the following operations internally to try to keep the denominators as small as possible

`‣ RationalFunctionByExtRepWithCancellation` ( rfam, num, den ) | ( function ) |

constructs a rational function as `RationalFunctionByExtRep`

(66.22-1) does but tries to cancel out common factors of numerator and denominator, calling `TryGcdCancelExtRepPolynomials`

(66.24-2).

`‣ TryGcdCancelExtRepPolynomials` ( fam, a, b ) | ( function ) |

Let `a` and `b` be the external representations of two polynomials. This function tries to cancel common factors between the corresponding polynomials and returns a list [ a', b' ] of external representations of cancelled polynomials. As there is no proper multivariate GCD cancellation is not guaranteed to be optimal.

`‣ HeuristicCancelPolynomialsExtRep` ( fam, ext1, ext2 ) | ( operation ) |

is called by `TryGcdCancelExtRepPolynomials`

(66.24-2) to perform the actual work. It will return either `fail`

or a new list of of external representations of cancelled polynomials. The cancellation performed is not necessarily optimal.

Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Bib Ind

generated by GAPDoc2HTML

王中王中特免费公开资料选料